|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-13-2021, 07:29 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 2
|
Yamaha G-2 Clutch Weights
Have a G-2 with a broken clutch weight have the parts to fix but am trying to figure out how to get the bottom Pin out. Top pin has set screws and slides right out. Looks like the other pin needs to be driven out and it does not want to budge. Do not want to break the housing. Is the pin taper and need to go a certain way or are there any tricks that will help in the removal? Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-14-2021, 06:23 PM
|
#2 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: Yamaha G-2 Clutch Weights
You will need to take out all 6 set screws that hold the upper weight pins. That will allow you to remove the "spider" to get to the lower weight pins set screws. Remember to "blue Loctite" them when you reassemble.
|
|
|
|
|
04-16-2021, 04:40 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2021
Posts: 2
|
Re: Yamaha G-2 Clutch Weights
Thanks Small Block, Good info.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| How many clutch weights needed | Gas Columbia ParCar | |||
| G1 clutch weights | Gas Yamaha | |||
| G1 clutch weights | Gas Yamaha | |||
| 81 g1 clutch weights | Gas Yamaha | |||
| WTB drive clutch weights for Yamaha G2 | Golf Carts and Parts | |||
Linear Mode
