Help me solve build problems please!

jasonfichter · 07-12-2016, 01:14 PM

Thank you!

Does the positive battery cable leading to the solenoid need a fuse on the battery end? If so what size?

Helirich · 07-12-2016, 02:15 PM

The fuse is not manditory, but you can put one on. I got either a 200 or 250 amp. (My controller is a 500, go figure)

Ps also, the fuse can go anywhere in the battery series.

scottyb · 07-12-2016, 02:54 PM

There is only 1 manufacture that suggests a fuse. I have seen that manufacture's control go up in flames and the fuse didn't pop, so no, I don't think you need one either

jasonfichter · 07-12-2016, 03:59 PM

Thank you guys!

jasonfichter · 07-12-2016, 05:56 PM

Quote:

Originally Posted by JohnnieB

1. Connect the + and - to the the battery pack + and - (Feed to 48V to 12V will work) and the third wire to the switched output from the keyswitch.

2. 1/4-20 threads. Depth of threaded mounting holes in motor case is a bit over 1/2"

3. Without the rubber spline bumper, you make get some rattling and other noises.

Do you happen to have a part number or link for the rubber spline bumper?

kernal · 07-12-2016, 06:00 PM

This might be it: https://shop.ezgo.com/products/Spline-Bumper.html

jasonfichter · 07-14-2016, 11:13 AM

Thanks. Does anyone have the wiring diagram for the run tow switch? Mine just got delivered it's not wired up.

JohnnieB · 07-15-2016, 07:20 AM

Run/Tow switch plugs into J3 on the controller.

jasonfichter · 07-15-2016, 10:47 AM

Quote:

Originally Posted by JohnnieB

Run/Tow switch plugs into J3 on the controller.

Sorry I should have specified. I need the diagram of the wires going into the switch side.

jasonfichter · 07-16-2016, 10:07 PM

Quote:

Originally Posted by jasonfichter

Sorry I should have specified. I need the diagram of the wires going into the switch side.

Anyone know the wiring on the switch side?

07-12-2016, 01:14 PM	#11
jasonfichter Not Yet Wild Join Date: Jun 2016 Posts: 12	Re: Help me solve build problems please! Thank you! Does the positive battery cable leading to the solenoid need a fuse on the battery end? If so what size?
jasonfichter Not Yet Wild Join Date: Jun 2016 Posts: 12

07-12-2016, 02:15 PM	#12
Helirich Gone Wild Join Date: Sep 2015 Posts: 572	Re: Help me solve build problems please! The fuse is not manditory, but you can put one on. I got either a 200 or 250 amp. (My controller is a 500, go figure) Ps also, the fuse can go anywhere in the battery series.
Helirich Gone Wild Join Date: Sep 2015 Posts: 572

07-12-2016, 02:54 PM	#13
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Help me solve build problems please! There is only 1 manufacture that suggests a fuse. I have seen that manufacture's control go up in flames and the fuse didn't pop, so no, I don't think you need one either

07-12-2016, 03:59 PM	#14
jasonfichter Not Yet Wild Join Date: Jun 2016 Posts: 12	Re: Help me solve build problems please! Thank you guys!
jasonfichter Not Yet Wild Join Date: Jun 2016 Posts: 12

07-12-2016, 06:00 PM	#16
kernal Gone Wild Join Date: Jul 2010 Location: Peachtree City, Ga. Posts: 2,759	Re: Help me solve build problems please! This might be it: https://shop.ezgo.com/products/Spline-Bumper.html

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-14-2016, 11:13 AM	#17
jasonfichter Not Yet Wild Join Date: Jun 2016 Posts: 12	Re: Help me solve build problems please! Thanks. Does anyone have the wiring diagram for the run tow switch? Mine just got delivered it's not wired up.
jasonfichter Not Yet Wild Join Date: Jun 2016 Posts: 12

Similar Threads
Thread	Forum
Rear wheel grind that I cannot solve	Electric EZGO
Will an upgraded motor solve my problem?	Electric Club Car
HELP solve my runtime issue!!	Electric Club Car
Help GX 390 Build now problems	Clone Engine Swaps
Trying to solve my EZGO problem	Gas EZGO