|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-23-2018, 06:37 PM | #11 |
Not Yet Wild
Join Date: Aug 2018
Posts: 14
|
Re: Grinding noise in rear, cart won't move
The splines in the side we took off we're ok. Not great (it's old). Still a grinding after we took them off, but we haven't taken the other half off yet. The man has the tools and he's still at work....so we'll continue. Y'all are great btw.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-23-2018, 06:39 PM | #12 |
Not Yet Wild
Join Date: Aug 2018
Posts: 14
|
Re: Grinding noise in rear, cart won't move
We've not taken the back half off yet. The man has the tools and he's at work. So maybe we haven't made it far enough yet. Y'all are great :)
|
08-25-2018, 06:50 PM | #13 |
Not Yet Wild
Join Date: Aug 2018
Posts: 14
|
Re: Grinding noise in rear, cart won't move
It still grinds with the front part off, or am I supposed to be looking behind the bearing?
|
08-25-2018, 08:53 PM | #14 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Grinding noise in rear, cart won't move
You might have a problem with your input shaft and motor coupling. Have you pulled the motor and looked at it yet?
Club Car DS driver’s club #59 |
08-26-2018, 06:56 PM | #15 |
Gone Wild
Join Date: Jan 2013
Location: Saint Petersburg, FL
Posts: 2,089
|
Re: Grinding noise in rear, cart won't move
And there weren't any metal flakes in the diff oil when you dropped the pan?
|
08-30-2018, 02:53 PM | #16 |
Not Yet Wild
Join Date: Aug 2018
Posts: 14
|
Re: Grinding noise in rear, cart won't move
We haven't pulled the motor yet, just pulled the pan off. I wasn't there when he pulled the pan, hut I did see some metal flakes on the driver's side axle where it comes into the housing
|
03-06-2020, 11:21 AM | #17 |
Not Yet Wild
Join Date: Aug 2018
Posts: 14
|
Re: Grinding noise in rear, cart won't move
It's been a while, but I thought I'd give an update. We put another rear end on the cart. Turns out the problem was the splines in the motor and the shaft were worn down. I'm guessing maybe because there were only 2 bolts holding it together. Anybody know if the shaft and coupler can be replaced, or should we just toss them both?
|
03-06-2020, 04:17 PM | #18 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Grinding noise in rear, cart won't move
Both can be replaced.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Grinding noise from rear end | Electric Yamaha | |||
Grinding noise from rear | Electric EZGO | |||
Grinding noise in rear | Gas Club Car | |||
grinding noise from rear | Electric Club Car |