|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-20-2010, 12:26 PM | #11 |
Conservatively Wild
Join Date: Aug 2009
Location: Below the Mason Dixon
Posts: 3,610
|
Re: EZGO TXT 48 volt Rebuild`
Looks good... Heading to HF to pick up one of those battery maintainers!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-20-2010, 12:32 PM | #12 |
Gone Wild
Join Date: May 2008
Posts: 772
|
Re: EZGO TXT 48 volt Rebuild`
Very nice build. Keep the pics coming!!
|
10-20-2010, 12:33 PM | #13 |
Maybe This Weekend :)
Join Date: May 2009
Location: Lake Norman, NC
Posts: 6,411
|
Re: EZGO TXT 48 volt Rebuild`
|
10-21-2010, 08:23 AM | #14 |
Not Yet Wild
Join Date: Jun 2009
Posts: 45
|
Re: EZGO TXT 48 volt Rebuild`
Just a little work on the cart last night. I made a bracket out of my surplus diamond plate for the fuse panel. I added a support bracket to the frame so it is nice and stout. I am going to use the rest of the bracket for mounting misc. items / relays.
|
10-21-2010, 10:09 AM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: EZGO TXT 48 volt Rebuild`
Looks terrific
Check your email for diagram |
10-21-2010, 12:08 PM | #16 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: EZGO TXT 48 volt Rebuild`
|
10-24-2010, 11:10 PM | #17 |
Not Yet Wild
Join Date: Jun 2009
Posts: 45
|
Re: EZGO TXT 48 volt Rebuild`
The feed will actually be a 10g wire from a solenoid to the fuse panel. I started wiring up the solenoids and controller. I will be using two momentary switches with LED rings. One red for reverse and one green for forward. Since they are momentary, I devised a latching relay system.
LED Switch |
10-25-2010, 12:43 AM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: EZGO TXT 48 volt Rebuild`
The switch is momentary? Hows this work?
|
10-25-2010, 08:02 AM | #19 |
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: EZGO TXT 48 volt Rebuild`
Pretty standard electronic solution using a DPDT latching relay to power the solenoids. Not sure if there will be a neutral, depending on how the circuit is designed it will be either in forward or reverse with the key on.
The lighted rings are cool! |
10-25-2010, 08:16 AM | #20 |
Not Yet Wild
Join Date: Jun 2009
Posts: 45
|
Re: EZGO TXT 48 volt Rebuild`
Yes, that is how it will work. It will be a latching relay. I used 3 standard Bosch 12 volt 5 prong relays to create the latch. The reverse switch will activate and latch the solenoid. The forward switch will break the latch so the default power on setting is forward. Whatever solenoid is active, the LED ring around the switch will glow. Green for for forward and red for reverse. There is no neutral. I never used it on my PDS cart so I did not wire one in.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
My EZGO 295 rebuild... | Gas EZGO | |||
Low budget ezgo rebuild in progress | Gas EZGO | |||
'79 EZGO complete rebuild | Gas EZGO | |||
ezgo 36 volt charger min volt for charge? | Electric golf carts | |||
91 EZGO clean up and rebuild | Electric EZGO |