lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-30-2011, 05:44 PM   #1
libertybellcdr
Gone Wild
 
libertybellcdr's Avatar
E-Z-GO
 
Join Date: Dec 2010
Location: Texas... Why live anywhere else???
Posts: 266
Default No Reverse

Cart has been running fine. I drove it a few times today.

Reverse stopped working. Solenoid still clicks, but no reverse. All connections are tight.

What could be the problem?
libertybellcdr is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-30-2011, 05:58 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: No Reverse

Mis-adjusted or mis-aligned F&R Try one turn tighter on Nut B (see the directions). IF the problem persist you may need to adjust the f&r Switch mounting bracket to the floor and move the F&R 1/4" at a time until she goes all the way into gear both ways. There are two small bolts holding the slotted bracket to the floor.

To see if the F&R base bracket needs adjusting remove the shifter linkage at nut A (see directions) and shift with a 9/16th wrench on the pivot rod. If it goes into gear fine then the base needs to be moved so the shifter can do the shifting properly.
Attached Images
File Type: jpg F&R Exploded for prints.jpg (75.8 KB, 20 views)
scottyb is offline   Reply With Quote
Old 01-30-2011, 09:01 PM   #3
libertybellcdr
Gone Wild
 
libertybellcdr's Avatar
E-Z-GO
 
Join Date: Dec 2010
Location: Texas... Why live anywhere else???
Posts: 266
Default Re: No Reverse

I tightened nut B and that fixed it.
libertybellcdr is offline   Reply With Quote
Old 01-30-2011, 10:07 PM   #4
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: No Reverse

Nut B sets the tension on the contacts...
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
reverse Gas EZGO
wiring a reverse light to the reverse buzzer? Gas Yamaha
Reverse alarm stuck - motor won't run forward or reverse Electric EZGO
EZG TXT, goes fwd, no reverse Electric EZGO
no go in reverse Gas Yamaha


All times are GMT -5. The time now is 06:29 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.