92 club car driven clutch

[stan995]

does the salsbury driven clutch work on 92 cars or is there more than 1 type if so how can i tell

[Springbok]

See this thread, we went over it the other day:

http://www.buggiesgonewild.com/gas-c...ops-hills.html

[stan995]

Originally Posted by Springbok

See this thread, we went over it the other day:

http://www.buggiesgonewild.com/gas-c...ops-hills.html

thanks but did not answer my question i will never ask any questions on here again because the 2 questions i have asked received the wrong answers that were nowhere near correct answers

[Springbok]

This is the 1984-1987 Salsbury driven clutch, which I assume you're talking about:



And this is the 1988-1996 driven clutch that you need to run:



The answer is that although the Salsbury driven clutch used from 1984-1987.5 will fit onto your transmission's input shaft, it will not line up straight with your drive clutch. I posted up the earlier thread because the guy who was having the problem has an '89 cart, which uses the same clutch as your '92 cart. I know that the motors are different between those years but the drive clutches are the same and mount in the same exact spot relative to the rear transaxle. If you run that older Salsbury driven clutch with your '92 drive clutch you will have the exact same problem that KB11 had and your belt will run crooked.