Got new controller, NEED HELP

linefuse29 · 11-05-2009, 04:48 AM

Mike I bought the controller on ebay. I did find my wiring diagram. Hopefully Ill have it up and running this afternoon.

gornoman · 11-05-2009, 06:45 PM

Well, how did it go?

mikesmotortoys · 11-05-2009, 06:49 PM

Was it a used controller? The pin connectors and instructions SHOULD have been included with the new controller...

linefuse29 · 11-06-2009, 04:52 AM

I found the instructions but there was no pin connector with it. I brought it from performance golf cars.com Yes its a new controller. Havent got everything up and running yet. Still working on it. Im also rebuilding my FNR switch.

gornoman · 11-06-2009, 06:45 PM

Don't forget the pix!

linefuse29 · 11-06-2009, 09:28 PM

Gornoman, what kind of screws hold the solenoid on the alltrax controller. It looks like it needs to be a plastic press in screw.

gornoman · 11-07-2009, 08:23 AM

There are two nylon inserts in the face of the controller that will accept coarse thread screws (not machine thread). Might be a #12 pan head sheet metal screw. Don't expect to be able to torque it down as the nylon will just strip out. They are just like license plate screws on many cars. You snug it up and stop.

linefuse29 · 11-07-2009, 05:16 PM

I have the FNR switch back on and the controller mounted. I am replacing a 1206 controller with the alltrax 4844. 36 volt. On teh directions it says the B- on alltrax goes to Batt- black and solenoid black. Everything is completely opposite of the way it was on my 1206. Which side of the solenoid is black. Some help would be greatly appreciated.

11-05-2009, 04:48 AM	#11
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Re: Got new controller, NEED HELP Mike I bought the controller on ebay. I did find my wiring diagram. Hopefully Ill have it up and running this afternoon.
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

11-05-2009, 06:49 PM	#13
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: Got new controller, NEED HELP Was it a used controller? The pin connectors and instructions SHOULD have been included with the new controller...
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

11-06-2009, 04:52 AM	#14
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Re: Got new controller, NEED HELP I found the instructions but there was no pin connector with it. I brought it from performance golf cars.com Yes its a new controller. Havent got everything up and running yet. Still working on it. Im also rebuilding my FNR switch.
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

11-06-2009, 06:45 PM	#15
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,292	Re: Got new controller, NEED HELP Don't forget the pix!

11-06-2009, 09:28 PM	#16
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Re: Got new controller, NEED HELP Gornoman, what kind of screws hold the solenoid on the alltrax controller. It looks like it needs to be a plastic press in screw.
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-05-2009, 06:45 PM	#12
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,292	Re: Got new controller, NEED HELP Well, how did it go?

11-07-2009, 08:23 AM	#17
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,292	Re: Got new controller, NEED HELP There are two nylon inserts in the face of the controller that will accept coarse thread screws (not machine thread). Might be a #12 pan head sheet metal screw. Don't expect to be able to torque it down as the nylon will just strip out. They are just like license plate screws on many cars. You snug it up and stop.

11-07-2009, 05:16 PM	#18
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52	Re: Got new controller, NEED HELP I have the FNR switch back on and the controller mounted. I am replacing a 1206 controller with the alltrax 4844. 36 volt. On teh directions it says the B- on alltrax goes to Batt- black and solenoid black. Everything is completely opposite of the way it was on my 1206. Which side of the solenoid is black. Some help would be greatly appreciated.
linefuse29 Not Yet Wild Join Date: Oct 2009 Posts: 52

Similar Threads
Thread	Forum
a DC motor controller ( electronic speed controller)	Golf Carts and Parts
controller	Electric EZGO
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05	Electric EZGO
Controller help	Extreme DC!
controller getting hot	Electric EZGO