Recommendation? DCS motor replacement

cheapjeep2 · 05-31-2010, 12:46 PM

Got a DCS cart (non-lifted) has a DCX400 controller, heavy duty solenoid, 4ga welding wire through out. We had a D&D 170-505-0001 but the setup proved too much for this motor and literally melted down from overheating. So what motor do people recommend to get a consistent 20-22 mph and not blow up?

Thanks,

Troy

bigk · 05-31-2010, 05:35 PM

Es-9b-50 D&D = Sweet!Just My opinion..

kgsc · 05-31-2010, 06:23 PM

I'm running a Plum Quick Bandit with a DCX400 with 22" tires and run 30+. Mine is a PDS but after the controller replacement I don't think it matters and if I'm wrong, I am sure someone will let me know.

cheapjeep2 · 05-31-2010, 06:35 PM

Quote:

Originally Posted by kgsc

I'm running a Plum Quick Bandit with a DCX400 with 22" tires and run 30+. Mine is a PDS but after the controller replacement I don't think it matters and if I'm wrong, I am sure someone will let me know.

KGSC,

I've got a coupe of questions for you on how you have your controller configured. Can you tell me what field mapping # the controller is running and if you have the Turbo setting on or off?

Thanks,

Troy

kgsc · 06-01-2010, 07:43 PM

Quote:

Originally Posted by cheapjeep2

KGSC,

I've got a coupe of questions for you on how you have your controller configured. Can you tell me what field mapping # the controller is running and if you have the Turbo setting on or off?

Thanks,

Troy

CJ2, to be honest, I don't know. When I bought the controller, I had the stock motor. I think he set it to PDS #6 but I don't think that is the field map. Turbo is on, Max speed, Max current, 0 brake. I would go hook up the laptop but the access port is behind the sol and I have to pull it to plug in. When I get a few minutes I'll pull it apart and let you know.

cheapjeep2 · 06-01-2010, 07:55 PM

Quote:

Originally Posted by kgsc

CJ2, to be honest, I don't know. When I bought the controller, I had the stock motor. I think he set it to PDS #6 but I don't think that is the field map. Turbo is on, Max speed, Max current, 0 brake. I would go hook up the laptop but the access port is behind the sol and I have to pull it to plug in. When I get a few minutes I'll pull it apart and let you know.

Thanks, well if you get to it great, but no worries if you don't.

05-31-2010, 12:46 PM	#1
cheapjeep2 Gone Wild Join Date: Nov 2008 Location: Peachtree City, Georgia Posts: 1,546	Recommendation? DCS motor replacement Got a DCS cart (non-lifted) has a DCX400 controller, heavy duty solenoid, 4ga welding wire through out. We had a D&D 170-505-0001 but the setup proved too much for this motor and literally melted down from overheating. So what motor do people recommend to get a consistent 20-22 mph and not blow up? Thanks, Troy

05-31-2010, 05:35 PM	#2
bigk Getting Wild Join Date: Mar 2009 Location: VA Posts: 118	Re: Recommendation? DCS motor replacement Es-9b-50 D&D = Sweet!Just My opinion..

05-31-2010, 06:23 PM	#3
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,124	Re: Recommendation? DCS motor replacement I'm running a Plum Quick Bandit with a DCX400 with 22" tires and run 30+. Mine is a PDS but after the controller replacement I don't think it matters and if I'm wrong, I am sure someone will let me know.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Replacement Gas Motor Options	Gas Club Car
Pendicular Motor Replacement	Electric EZGO
Precedent Motor Replacement	Electric Club Car
Replacement Motor	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum