Melex 252 forward/reverse switch wiring problem

[cdj901]

i have replaced the f/r switch on a old model 252 . all battery cables are in the right place but there are 3 smaller wires that im confused as to the location, 2 of which are the micro switch, i believe them to be wired correctly but the bottom terminal of the f/r switch also had a small wire that was missing all but the connector. so my question is what wire other than the battery cable connects to the terminal at the 6 oclock position of the forward reverse switch . i have tried to find wiring diagrams but all they show are the battery connections. any help would be great. thanks!

[93yellowclubcar]

Possibly try posting in the electric EZGO section, a Melex is an old copy of an EZGO.

[cdj901]

I'll answer myself, found out it goes to the key switch. thanx anyway

[93yellowclubcar]

Glad you found the problem.

Welcome to BGW, by the way! In the future you might get better responses if you post questions about your Melex in the EZGO section - there's a lot more traffic up there and the guys are really good about helping answer any question they can.

[speedracer420]

I am trying to figure mine out as far as those three wireson mine where did you hook up the ones from micro switche?