primary clutch cap

hello · 10-29-2012, 04:39 PM

Hi guys got a question primary clutch cap that has 3 bolts that hold it on well I have one striped not sure what thread it is or size I know i have to drill it out and rethread not sure what size to rethread

thanks

bigstik40 · 10-31-2012, 07:40 AM

Sorry, can't help exactly but here is the Yamaha p/n = (90105-06861-00) for the screw. They don't list the size

. My suggestion to you would be to measure the metric screw thread O.D. in inches (using dial caliper or micrometer) and pick the next bigger U.S. sae screw size with a thread pitch as close to the metric one as you can. (You will only have a couple of choices, the us ones will be coarse and fine thread.) I'm thinking you will need #10 (3/16) or 1/4 U.S. size. Better yet, take the old screw to the hardware store and they will help you. Hope this helps - RAY

hello · 10-31-2012, 03:46 PM

Thanks ray went with a 1/4 .

10-31-2012, 07:40 AM	#2
bigstik40 Gone Wild Join Date: Sep 2010 Location: Erie, Pennsylvania Posts: 989	Re: primary clutch cap Sorry, can't help exactly but here is the Yamaha p/n = (90105-06861-00) for the screw. They don't list the size. My suggestion to you would be to measure the metric screw thread O.D. in inches (using dial caliper or micrometer) and pick the next bigger U.S. sae screw size with a thread pitch as close to the metric one as you can. (You will only have a couple of choices, the us ones will be *coarse and fine* thread.) I'm thinking you will need #10 (3/16) or 1/4 U.S. size. Better yet, take the old screw to the hardware store and they will help you. Hope this helps - RAY

10-31-2012, 03:46 PM	#3
hello Gone Wild Join Date: Sep 2010 Location: ontario Posts: 182	Re: primary clutch cap Thanks ray went with a 1/4 .

Similar Threads
Thread	Forum
98 Par Car Primary Clutch?	Gas Columbia ParCar
Getting primary clutch apart?	Gas Club Car
84 Primary Clutch	Gas EZGO
primary clutch on G2	Gas Yamaha
g2a primary clutch	Gas Yamaha

10-29-2012, 04:39 PM	#1
hello Gone Wild Join Date: Sep 2010 Location: ontario Posts: 182	primary clutch cap Hi guys got a question primary clutch cap that has 3 bolts that hold it on well I have one striped not sure what thread it is or size I know i have to drill it out and rethread not sure what size to rethread thanks

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum