|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
07-12-2020, 09:30 AM | #41 |
Not Yet Wild
Join Date: Jul 2020
Posts: 1
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
Hello together,
i am struggeling with getting connection to my curtis 1238e. Got an original FDTI-Chip, everything wired up properly, but i get checksum error from the controller. Tryed to flash with FT-Prog but it seems that i cant change the Serialnumber. Tryed to blank the serial out as it is in the template from ishootstuff but i am not able to. Can anybody help me get out of this? Regards retrEV |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-12-2020, 02:01 PM | #42 |
Not Yet Wild
Join Date: Jul 2020
Location: Wylie, TX
Posts: 17
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
That template has Autogenerate Serial Number enabled. You can't edit the serial number unless that is checked off.
|
07-12-2020, 03:09 PM | #43 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
Start looking here as well. https://www.buggiesgonewild.com/show...=1238&page=124
|
01-09-2022, 09:50 PM | #44 | |
Not Yet Wild
Join Date: Aug 2016
Posts: 38
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
Quote:
|
|
01-10-2022, 08:50 AM | #45 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
You need to create that entry manually and add the value.
|
08-25-2023, 05:54 PM | #46 |
Not Yet Wild
Join Date: Aug 2023
Posts: 12
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
so I've been searching for an hour and can't seem to find the curtis 1309 usb drivers. Can someone help me out and point me to a link?
|
08-25-2023, 06:05 PM | #47 | |
Gone Wild
Join Date: Apr 2008
Location: Western NY
Posts: 2,300
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
Quote:
|
|
08-25-2023, 06:09 PM | #48 |
WARRANTY VOID
Join Date: Aug 2021
Posts: 1,723
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
|
08-25-2023, 08:18 PM | #49 |
Not Yet Wild
Join Date: Aug 2023
Posts: 12
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
I've been doing a lot of reading and can't seem to figure this out. You said in another thread that all that is needed to tune the cart this way is a laptop with YAT. Can the 1314 software be loaded on the laptop to tune the cart without having to have the curtis programming console? If so where can I download this?
Thank you |
08-25-2023, 08:20 PM | #50 |
Not Yet Wild
Join Date: Aug 2023
Posts: 12
|
Re: $25 Windows 10 x64 OEM mode 1314 and DIY Cable
im sorry it was not you it was usgicollector that said a laptop only could be used to tune with this method.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for 1314 PC Software | Electric golf carts | |||
Curtis 1314 | Electric golf carts | |||
1314-4401 | Electric golf carts | |||
Proper serial cable for Windows 7/Alltrax DCX | Electric Club Car |