05-19-2021, 10:00 AM | #531 | |
Gone Wild
Join Date: Jan 2016
Location: Butler, PA
Posts: 353
|
Re: clone exhaust
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-11-2021, 08:29 AM | #532 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone exhaust
Bump
|
12-05-2021, 04:45 PM | #533 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone exhaust
Bump for Marsh Bandit
|
12-06-2021, 12:05 AM | #534 |
Not Yet Wild
Join Date: Aug 2016
Location: Pearland, Tx
Posts: 45
|
Re: clone exhaust
|
01-23-2022, 07:28 PM | #535 |
Not Yet Wild
Join Date: Oct 2021
Posts: 25
|
Re: clone exhaust
Leave the pipe to the engine, a slip fit, with heavy springs.
|
02-06-2022, 09:00 PM | #536 |
Getting Wild
Join Date: Dec 2018
Location: Maine 8/ Florida 4
Posts: 129
|
Re: clone exhaust
CC5A67EB-36F5-4691-ABA7-640213BAA3C6.jpg
BB6FFA0C-5B09-44F0-A1E3-ECB7D3F77B95.jpg On my 89 Carryall 1 I used a yamaha gc muffler with the heat shield cut off. I welded an exhaust flange from VC onto the VC header pipe and had to cut and re-weld the pipe and flange on the muffler to match the proper angle. Then i used the original Carryall aluminum c clamp that held the OEM muffler. I did have to widen it some to fit the yamaha muffler, but it works great, its quiet and still fast plus stainless steel so it wont rot out. |
02-26-2022, 12:31 PM | #537 |
Not Yet Wild
Join Date: Oct 2021
Posts: 25
|
Re: clone exhaust
Were I work, we have a small fleet of old cushman work buggies. We use the stainless flex, but in 6" for the exhaust systems. They work.
|
03-02-2022, 03:16 PM | #538 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone exhaust
I seen on both another site and Red Beard's garage where they used $40 sport bike muffler off E Bay. It seemed to be pretty quiet on both cases.
|
10-04-2022, 02:33 PM | #539 |
Not Yet Wild
Join Date: Aug 2021
Location: Chicago area
Posts: 16
|
Re: clone exhaust
Bump for great info. For those using black plumbing pipe, what are you using to seal the joints? Permatex high-temp thread sealant says up to 400 degrees, is that adequate? I'm getting some leakage through the threads, no matter how hard I crank them down.
|
10-04-2022, 02:55 PM | #540 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
|
Re: clone exhaust
JB Weld Hi Temp RTV Red 550-650 F, JB Extreme Heat 1000 F
|
Tags |
g14 clone exhaust |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16 clone exhaust too loud | Gas Yamaha | |||
clone exhaust pipe size | Clone Engine Swaps | |||
Your clone noisy? (non exhaust noise) | Clone Engine Swaps | |||
Clone Swap Exhaust!! | Clone Engine Swaps | |||
clone exhaust options | Clone Engine Swaps |