clutch tool wanted

[ckiguy]

ok guys i know some one out there has a extra clutch removal bolt/tool, for a fe350. any one want to help out a member before i sink 40 dollars on a bolt? i would greatly appricate it. maybe they could have a section for this kinda stuff. or if they do im not smart enough to have found it. thanks guy!

[kidz]

Google is your friend! Link http://www.lvssales.com/store/home.php?cat=79

[golfcarfixer]

If You Want You Could Make One

[ckiguy]

well fixer all i need is to verifie what sisze of bolt i need, for the clutch and i was told i can use 3/16 round stock as the "pusher". i found that the hold down bolt is a 3/8 by 24 pitch. if i wrong, i would appriciate if i would get corrected. it wont hurt my feelings. and i guess how long the bolt, and the round stock should be. or just use the existing hold down bolt. again any ideas im game. i agree with some people that my delaer here in cbus/hilliard wants a hr shop time to pull it. they are hurting . they laid of half there guys, and kept 2. on in the shop, one in the field. and my snap on dealer has no idea how he can get one, and hes the delaers rep. i just need to reseal my case!

[ckiguy]

is that a engineer castle i see on your cart golf cart? if i pop its hood would i see a sapper tab there?

[golfcarfixer]

yes it is an engineer castle and if you pop the hood it is probably full of dirt.

[golfcarfixer]

That Tool From Redhawk Is 56.50 And Whatever Shipping Would Be.part#cp-0019,oem 1014496. They Retail Other Parts To.he Is Probably The Closest To You,they Are In Baltimore Md.#1-866-666-7278.