|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-09-2017, 05:05 AM | #1 |
Not Yet Wild
Join Date: Jan 2017
Posts: 2
|
G14 timing marks? Information please.
Need to know what is the correct way to line up timing marks on a Yamaha g14 JN5 engine? I will explain and try and upload pics also. This is what I have going on. I have tore down clutch side of engine and am replacing rod bearings on mine were worn down and bad. I am about to put back together and I saw a post showing G9 marks lined up pointing towards crank mine is not like this. The crankshaft dot and front gear dot are lined up but the front gear dot is on opposite side away from crankshaft. The rear smaller gear dot is lined up directly towards center of crankshaft closet to it. I have not changed any of this when tearing down this is first time engine ever been opened. Going to attempt to add pictures this is my first post lol. Thanks for any input.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-09-2017, 09:37 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G14 timing marks? Information please.
Your balance shaft is perfect, your cam is 180 out. The hole should be facing the mark on the crank gear.
|
04-22-2019, 06:59 PM | #3 |
Not Yet Wild
Join Date: Apr 2019
Posts: 1
|
Re: G14 timing marks? Information please.
Just rebuilt same engine and wondered if there is a picture of the correct alignment out there??
|
Tags |
new rod bearings, yamaha g14 timing marks |
|
|
Similar Threads | ||||
Thread | Forum | |||
kf82 timing marks? | Gas Club Car | |||
FE290 Timing Marks | Gas Club Car | |||
Timing marks | Gas Yamaha | |||
If the timing marks appear correct then | Gas EZGO | |||
timing marks on crank | Gas Yamaha |