03-19-2021, 08:32 AM | #11 |
Getting Wild
Join Date: Jan 2019
Location: South Florida
Posts: 123
|
Re: Programming Software Download Here
Great post. My 20 min programming project rolled into 1-2 hours because I couldn't figure this out lol
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-19-2021, 08:14 PM | #12 |
Not Yet Wild
Join Date: Nov 2020
Posts: 64
|
Re: Programming Software Download Here
Haha. Mine turned into about 18 hours because I was convinced that the incorrect drivers that I downloaded should have worked. Once I remembered that computers are usually right I retraced my steps and figured out my error.
|
03-22-2021, 06:31 PM | #13 |
Getting Wild
Join Date: Mar 2021
Posts: 81
|
Re: Programming Software Download Here
So the program fires up but it doesn't seem to be communicating with the cart. The green light inside of the transparent blue CANUSB unit quickly flashes when it's plugged but then goes off. I only copied the .dll file mentioned in the post. Was I supposed to copy the .lib file as well? Any suggestions? "Tune" option is greyed out. Only thing I can select is "Monitor for PC." Key is turned to on position.
|
03-22-2021, 06:56 PM | #14 |
Gone Wild
Join Date: Oct 2012
Location: SoCal
Posts: 671
|
Re: Programming Software Download Here
If you have the software opening correctly, but the cart isn't being detected and the cable lights just flash and go off or something weird, it's most likely that the drivers for the CANUSB did not successfully install automatically.
Using the same download I mentioned higher in this thread, you'll just install those drivers following these steps in this post below. I don't have the exact situation in front of me, so the steps are mostly from memory so you may need to improvise on the fly but you're just trying to install the drivers. Look in your device manager and see if it's showing "other devices" or "unknown" or something to confirm the driver isn't properly installed. https://www.buggiesgonewild.com/show...8&postcount=60 |
03-22-2021, 07:13 PM | #15 |
Getting Wild
Join Date: Mar 2021
Posts: 81
|
Re: Programming Software Download Here
Found the issue. Had to do some research on the CANUSB manufacturer website. I found a link to an updated chipset driver. I pasted below it is if anyone else is having the same issue. Connected right away after download. My original FWD RPM setting was at 5k with a 7k max so I bumped that to 7k - top out at about 30 MPH, don't really want to push it further right now.
https://ftdichip.com/drivers/d2xx-drivers/ |
03-22-2021, 07:18 PM | #16 |
Getting Wild
Join Date: Mar 2021
Posts: 81
|
Re: Programming Software Download Here
30 MPH - Takes a while to get up there. Anyone figured out acceleration? I took Acc Rate Fwd down from 7.5 to 5 seems to have made a little bit of difference.
|
03-22-2021, 08:42 PM | #17 |
Gone Wild
Join Date: Oct 2012
Location: SoCal
Posts: 671
|
Re: Programming Software Download Here
I have a ton of settings to try and I'm waiting on my cable from my parents in another state...they're taking forever to tinker with their cart. I'll be posting an update in probably 1-2 weeks.
|
03-22-2021, 09:13 PM | #18 |
Getting Wild
Join Date: Mar 2021
Posts: 81
|
Re: Programming Software Download Here
Cool. I’ll keep tinkering and report back as well. I need to find a system of keep track of what I change. Is there a file in the software to restore back to factory settings in case one gets carried away?
|
03-23-2021, 10:16 AM | #19 |
Gone Wild
Join Date: Oct 2012
Location: SoCal
Posts: 671
|
Re: Programming Software Download Here
You should export the profile and save the file on your computer somewhere. Each version you create, you can export and save so you can always go back to a previous version. I think in the software folder there is a *.neos file that contains the factory settings...but the factory settings I've seen change over time a bit.
|
03-25-2021, 09:09 AM | #20 |
Getting Wild
Join Date: Jun 2018
Posts: 100
|
Re: Programming Software Download Here
Sorry it posted elsewhere and I missed it, but is this compatible with Mac OS or is it only Windows?
Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Genius Programming Software | Electric Yamaha | |||
Any luck programming the new RXV Curtis controller via Software | Electric EZGO | |||
Field Map #3 download..? | Electric EZGO | |||
Alltrax Programming Software | Electric Club Car | |||
How to download manual? | Gas Yamaha |