|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-12-2022, 02:56 PM | #1 |
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
Ez go 36 volt again!!!
Not sure the year of the cart but here is where im at now. Cart wouldnt move. all voltages were good except for the pedal control voltages. I tried a brand new ITS pedal box module. still same problem. I rigged up a potentiometer from 50 to 5000 ohms and the cart works!!!!! My question is this do I have the wrong ITS module ? Do I need some sort of resistor box controlled by the pedal? wrong controller? HELP!!!!! This cart was " WORKED ON" before I got it so I have no idea what went on other than the wiring was messed up thanks to the help from Johnny B!!!!.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2022, 04:17 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ez go 36 volt again!!!
Maybe I missed something but if the cart works on 0-5k maybe the controller is not set up for ITS ?
|
01-12-2022, 06:29 PM | #3 |
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
Re: Ez go 36 volt again!!!
Thats what im wondering. I guess its a curtis 1205 4 spade controller. Can you set those up for different pedal inputs?
|
01-13-2022, 06:41 AM | #4 |
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
Re: Ez go 36 volt again!!!
Can you educate me here? I seldom work on electric carts. The controller was purchased by the dealer I am assuming by the request of the client. I think its a curtis 1205. Do you need to buy the controller for a ITS or a resistor box? Can you swap a jumper or something in it or program it for the ITS? Is it better ( cheaper) to get a 0 to 5K pedal assembly?
|
01-13-2022, 12:40 PM | #5 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ez go 36 volt again!!!
Quote:
Sent from my SM-G991U using Tapatalk |
|
01-13-2022, 12:42 PM | #6 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ez go 36 volt again!!!
It would be best and easiest to install the correct controller.
Sent from my SM-G991U using Tapatalk |
01-13-2022, 02:53 PM | #7 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ez go 36 volt again!!!
I'd put an Alltrax SR48400 (or larger) user programmable controller in it.
|
01-14-2022, 06:33 AM | #8 |
Gone Wild
Join Date: Oct 2010
Location: Central New York
Posts: 812
|
Re: Ez go 36 volt again!!!
Thanks again you guys!! The owner is going to buy the correct controller. I just bought a decade box off Amazon to test controllers that use the resistance pedal assembly for testing.
|
01-14-2022, 08:20 AM | #9 | |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: Ez go 36 volt again!!!
Quote:
Sent from my SM-G991U using Tapatalk |
|
01-14-2022, 02:02 PM | #10 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ez go 36 volt again!!!
Quote:
A decade is 10 of something. (0 thru 9) It's easier to link to some than try to explain what they are. https://www.amazon.com/s?k=decade+bo...s_ts-doa-p_3_6 |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
6 - 8 volt batteries installed in 36 volt golf cart | Electric EZGO | |||
Light Connection for 2006 Precedent after 12 Volt - 8 Volt Conversion | Electric Club Car | |||
placement when adding 2 more 6 volt batteries to 36 volt for 48 volt conversion | Electric Club Car | |||
1990 Club Car DS 36 volt to 48 volt conversion fitting batteries question | Electric Club Car | |||
Volt reading when Isolating 2 6v batts, is seperate volt meter needed? | Electric EZGO |