|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
01-15-2022, 05:51 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2021
Posts: 7
|
SR48600/SW202 F/R install - no reverse
I just installed my SR controller and the SW202 F/R switch.
Two issues that I cannot figure out. No reverse. when I press the pedal, the solenoid clicks, but it doesn't move and the fan on the controller turns on. Also notice that my pack voltage was 40V, but w/in an hour it bled down to 38.6. Any ideas on these two issues? Any advice would be much appreciated.  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax SR48600 Reverse options | Electric Club Car | |||
| 2008 -48v conversion - SR48500 and sw202 install | Electric EZGO | |||
| SW202 install using stock controller | Electric EZGO | |||
| 2006 EZGO TXT MZJ400 and SW202 Install | Electric EZGO | |||
| SW202 Install and now won't move | Electric Club Car | |||
Linear Mode
