|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-11-2015, 06:00 PM
|
#1 |
|
Gone Wild
 Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
RXV brake releases??
2008 rxv, original brake with lever. The cart stopped for no reason. I changed the solenoid, still no go.
Installed new brake, now cart will run and will stop. HOWEVER, when the key is OFF, the brake releases??? Any ideas??? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-11-2015, 06:44 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV brake releases??
Never heard of that, the brake requires power to release. Disconnect the plug on the brake to see if its an electrical issue (cart is now locked), or a mechanical issue (cart still unlocked).
|
|
|
|
|
03-11-2015, 07:04 PM
|
#3 |
|
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: RXV brake releases??
Does new brake have lever?
Did you get "repaired, or used" brake ? The brake on motor has nothing to do with normal driving and stopping. It is only a "parking/emergency" brake. You may have replaced one failed "dragging/stuck on" brake with a failed always off brake |
|
|
|
|
03-11-2015, 08:24 PM
|
#4 |
|
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV brake releases??
The new brake, is new, no lever!!
So what do you think is the issue? |
|
|
|
|
03-11-2015, 08:26 PM
|
#5 | |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV brake releases??
Quote:
|
|
|
|
|
|
03-11-2015, 08:34 PM
|
#6 |
|
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV brake releases??
Its not my cart! It is a friends cart. I was hoping to get some info here, before i go see the cart on friday.
He changed the brake, installing a new motor brake ( no handle). Was carefull about tightening the 3 bolts. so i can't answer your question yet, until i try it. i would appreciate any info you can give me befoer i go over there, and what all to do and to try??  |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ezgo Freedom Parking Brake Issues After Brake Job | Electric EZGO | |||
| Brake cable snapped, disc brake conversion? | Electric EZGO | |||
| front brake w/ stock back brake??? | Electric EZGO | |||
| Alltrax DCX400 plug brake and Brake current | Electric EZGO | |||
| G2 Drum brake to disk brake conversion help | Gas Yamaha | |||
Linear Mode
