|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-19-2015, 06:02 PM
|
#1 |
|
Gone Wild
 Join Date: Jan 2010
Location: LA (Lower Alabama)
Posts: 276
|
Bench testing a 97 ez go its
Can someone tell me how to test my ITS on my ez go? Scottyb and I are trying to eliminate other issues before replacing the controller.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-19-2015, 06:06 PM
|
#2 |
|
Gone Wild
Join Date: Jan 2010
Location: LA (Lower Alabama)
Posts: 276
|
Re: Bench testing a 97 ez go its
Here it is. I replaced the wiring a while back when chasing an intermittent problem.
|
|
|
|
|
05-19-2015, 06:19 PM
|
#3 |
|
Gone Wild
Join Date: Jan 2010
Location: LA (Lower Alabama)
Posts: 276
|
Re: Bench testing a 97 ez go its
Foll all readings, please see other post. "Modified ez go won't go" a couple threads down.
|
|
|
|
|
05-19-2015, 06:28 PM
|
#4 |
|
Gone Wild
Join Date: Jan 2010
Location: LA (Lower Alabama)
Posts: 276
|
Re: Bench testing a 97 ez go its
Here is the controller I'm running. 700 amp Logisystems
|
|
|
|
|
05-19-2015, 08:10 PM
|
#5 |
|
Gone Wild
Join Date: Jan 2010
Location: LA (Lower Alabama)
Posts: 276
|
Re: Bench testing a 97 ez go its
Bump
|
|
|
|
|
05-20-2015, 04:50 AM
|
#6 |
|
Gone Wild
Join Date: Jan 2010
Location: LA (Lower Alabama)
Posts: 276
|
Re: Bench testing a 97 ez go its
Bump
|
|
|
|
|
05-28-2015, 10:54 AM
|
#7 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Bench testing a 97 ez go its
There is a MOLEX plug that connects the ITS and microswitch to the wiring harness. It often needs cleaning. Unplug, spray contact cleaner, then replug/unplug/replug several times. Also check the spade connectors on the ITS and microswitch.
|
|
|
|
|
05-29-2015, 04:58 AM
|
#8 |
|
Gone Wild
Join Date: Jan 2010
Location: LA (Lower Alabama)
Posts: 276
|
Re: Bench testing a 97 ez go its
Thanks for the reply. I tried that first. Scotty and Johnnie were correct, my Logisystems controller actually ended up S#!@@ing the bed. The new Alltrax works great.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| bench testing a motor (picture) | Electric Club Car | |||
| Bench testing DS motor/controller | Electric Club Car | |||
| Bench Testing 96 DCS Motor | Electric EZGO | |||
| Bench testing | Electric EZGO | |||
| Bench testing a Speed Sensor | Electric Club Car | |||
Linear Mode
