|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-27-2015, 04:37 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2012
Location: dover de
Posts: 71
|
99 TXT not moving...911
Hi have a little emergency..... My 99TXT wont move.. 2 days ago I put it in forward and hit the go-pedal and it waited a sec and then literally jumped into gear.. Last night I put it in forward and hit the pedal and nothing for a couple seconds and then it was like it slammed into gear. Took it out of gear and tried to replicate it and all I have now is clicking... I put it in reverse and it would run in reverse for a ew minutes and then it started to do the same thing as it did in forward.. Now it wont do either. And yes the batteries are charged.
 It is all stock. Were at the campground and my ezgo is a nogo... 2 yrs ago I replaced the forward/reverse switch. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-27-2015, 05:41 AM
|
#2 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,174
|
Re: 99 TXT not moving...911
Sounds like an FnR switch problem. You could try tightening the center nut on the switch and see what happens but I think you have a melted post. With it in F do the lugs line up with the posts?
|
|
|
|
08-27-2015, 06:02 AM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2015
Posts: 1
|
Re: 99 TXT not moving...911
You may have already done this, check all connections on or near fwd reverse switch. Maybe jack up rear with seat off and test. Don't know what kind of fwd rvs switch is on those but if wires move when you use switch , look at those first.
|
|
|
|
|
08-27-2015, 06:31 PM
|
#4 |
|
Not Yet Wild
Join Date: Oct 2012
Location: dover de
Posts: 71
|
Re: 99 TXT not moving...911
Yup, found a loose connection stud on the rear bottom. It looks like I could re-weld it? I know there like 150 bucks or so.
|
|
|
|
|
08-27-2015, 07:20 PM
|
#5 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,174
|
Re: 99 TXT not moving...911
New contact board by it self is like $50
|
|
|
|
|
08-27-2015, 08:12 PM
|
#6 |
|
Not Yet Wild
Join Date: Oct 2012
Location: dover de
Posts: 71
|
Re: 99 TXT not moving...911
everything Iv seen is 100-150ish.. Do you have a link?
|
|
|
|
|
08-27-2015, 08:16 PM
|
#7 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 99 TXT not moving...911
Shopezgo . Com Has part number14651G1 for $46.41
|
|
|
|
|
08-28-2015, 05:59 AM
|
#8 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,174
|
Re: 99 TXT not moving...911
What he said
 If you need it now, you can bypass the fnr by just moving the cable to the stud if would connect to with the switch in F. Look at the buss bars and see what should be connected.. I am pretty sure 6 o'clock and 9 o'clock are together and 12 and 3 are together.. Mark the cables before you do this and take the cam off so bad things don't happen. |
|
|
|
|
08-28-2015, 09:33 PM
|
#9 | |
|
Not Yet Wild
Join Date: Oct 2012
Location: dover de
Posts: 71
|
Re: 99 TXT not moving...911
Quote:
Interesting..... Its the 6 oclock stud that is defective. So I would take the 6 cable and attach it to the 12? |
|
|
|
|
|
08-29-2015, 08:51 AM
|
#10 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,174
|
Re: 99 TXT not moving...911
No, that would be bad.. Look at the buss bars on the switch. In forward I believe 9 and 6 are connected.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Another DS Not Moving | Electric Club Car | |||
| Moving | Electric Club Car | |||
| 96 not moving well................. | Gas Club Car | |||
| 85 CC not moving | Electric Club Car | |||
Linear Mode
