|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-10-2015, 10:48 PM | #1 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
RXV key switch ohms???
I have been trying to fix this on going problem with my 2010 rxv.
Brief update, it sometimes takes5 to 8 times of turning the key switch off then on to reverse, before reverse would actually work. no suggestions have worked. HERE IS MY QUESTION : IN the dianostic manual, it tells you to ohm out the key switch terminals, and they should have .1 ohms. So mine has 1.0 ohms. I got my hands on a couple of used switches and ohmed them out and was getting 4,2 ohms, 3.3 ohms, etc. I opened up a brand new factory unique key switch and ohmed it out, and it ohms out at a perfect .1 ohms, just like the manual says!!! So i install the new unique switch to try, and it seems to work everytime. So i am thinking, that since my key switch, FOR SOME REASON, has a higher ohm reading, causing more resistance, it might be the cause of my problems. So i will order a new switch. Currently, the switch that is in there is the 2nd one. So a new one will be the third! What causes these key switches, to eventually have the ohms raise?? Is this rxv system so sensitive, that a difference of ,9 ohms will cause this problem?? Anyone ?? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-12-2015, 09:10 AM | #2 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: RXV key switch ohms???
Yes it is that sensitive.
Main cause of switch failure is heavy key rings RXV's from golf course rarely have bad keyswitches (one key on small ring w/cheap plastic tag) 1 Year after family buys cart, switch is bad.(3 Key rings held together with carabiner 2 plastic dolls a flashlight and garage door opener) |
12-12-2015, 11:25 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV key switch ohms???
Huge, heavy keyrings causing you the blues? Dont feel too bad, "some" massive automobile manufacturer just recently got "raped through the coals" by the lawyers for just the same thing.....
|
12-13-2015, 09:43 AM | #4 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: RXV key switch ohms???
What !! You shouldn't hang 6lbs. of crap on a keying????
|
12-13-2015, 02:33 PM | #5 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV key switch ohms???
How bizaar is that? Heavy keys will cause the key switch ohms to go up?
What exactly happens to the key switch? Because i ohm it when the switch is off the cart , in hand, and it measures 1 to 4 ohms higher than its suppose to be. |
12-14-2015, 09:23 AM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV key switch ohms???
We are not saying that the keys have some powerful, un-measurable force, that affects key switches only when in the switch. We are talking about the wear-&-tear that accumulates over time from heavy keyrings. My keyring for my real car has about 20 keys total, amd my keyswitch has been replaced roughly every 10 years due to wear (i have replaced it twice now, and im ok with that replacement interval).
|
12-14-2015, 09:53 AM | #7 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV key switch ohms???
CG, that is good enough for me
I will use that info many times in the future, Thanks. Like Dustin Hoffman said in the move "HERO", "The world is a big pile of BS. If you see something on that pile that you like, you take it and it becomes your BS". |
12-30-2015, 09:48 AM | #8 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV key switch ohms???
CG. update. I have tried installing 2 new key switches in this rxv, and still has not fixed the problem.
Still need to turn switch on and off many times, before cart will engage. When the cart won't engage, you can tell by the normal "lurch" doesn't seem as strong. |
12-30-2015, 09:58 AM | #9 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
|
Re: RXV key switch ohms???
When measuring ohms down in the 1 ohm or less, most meters are very inaccurate. You need a special "LOW OHMS" meter to measure resistance that small. Your leads are more than .1 ohms! Your switch is probably fine as you found out by replacing it twice!
|
12-30-2015, 07:22 PM | #10 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: RXV key switch ohms???
I have a fluke meter, it seems pretty accurate.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
what ohms should be at accelerator wires | Electric Club Car | |||
what will 6500 ohms hurt | Electric EZGO | |||
pulser ohms | Gas EZGO | |||
controller sees over 5000 ohms | Electric EZGO | |||
how many ohms for coil | Gas EZGO |