FNR switch / potentiometer

[cardwellmarty]

On my cart ms #4 is not a double switch...

Sent from my KFFOWI using Tapatalk

[cardwellmarty]

I'm going to hook up back up switch the way I unhooked it just didn't make sense, trying to learn not just change parts, and yes scottyb you have helped me a lot already, thanks.

Sent from my KFFOWI using Tapatalk

[cardwellmarty]

Back up alarm ( not backup switch)...

Sent from my KFFOWI using Tapatalk

[cardwellmarty]

scottyb where my #4 micro switch is there are only 2 plug ins, the top one has red wire to backup alarm, that's why I questioned position of pot wires that plug in, because wouldn't one side be hot since there is a red wire going to backup alarm? In previous post you posted didn't matter where wires went ( which my old pot switch had black and white wires and the new one I ordered had blue and brown, I contacted supplier they couldn't or wouldn't tell me anything per liability I was told, which I thought was silly) just trying to make sure I don't fry new switches.

Sent from my KFFOWI using Tapatalk

[cardwellmarty]

New forward reverse #4 micro switch has two plug ins, old micro switch which is not double has 4 screws , 2 for pot switch, 2 for red wire on backup alarm, and one for white wire going to plus side of battery as shown on diagram last battery in series.

Sent from my KFFOWI using Tapatalk

[cardwellmarty]

The FNR switch I bought was for ezgo 1986.5 to 1993, which my cart is 1993 marathon.

Sent from my KFFOWI using Tapatalk

[scottyb]

Kind of sounds like you got it figured out now

[cardwellmarty]

Yes did figure it out new FNR switch I purchased was for a resistor cart, what I needed was per your diagram with a Controller. I am learning just because carts are same year an model doesn't mean parts will interchange. Resistor cart micro switches and controller cart micro switches re different, thanks for the help.


Sent from my KFFOWI using Tapatalk