|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
03-31-2018, 02:58 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2018
Posts: 3
|
Alltrax XCT 48400 Install on Club Car DS
I have a 2006 Club Car DS that I am installing Alltrax XCT48400. I have looked at the manual that came with the controller and in the drawing it requires ''regen diode'' and a MR754 diode. The newest revision from Alltrax website shows only MR754 diode. So which is correct?The build date on the controller is from June 2017.Also there is a 4 pin plug that is used on Curtis controller but no provision on Alltrax controller, do i discard this. Any help would be greatly appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-31-2018, 06:53 PM
|
#2 |
|
Crazy Wild
 Join Date: Jun 2015
Location: Carolina Lowcountry
Posts: 796
|
Re: Alltrax XCT 48400 Install on Club Car DS
The 4 pin is for Curtis programming. You will not use it on Alltrax.
|
|
|
|
|
04-03-2018, 08:51 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2018
Posts: 3
|
Re: Alltrax XCT 48400 Install on Club Car DS
Thanks Muddog.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax XCT-48400 question | Electric Yamaha | |||
| Xct 48400 alltrax programming issues | Electric Yamaha | |||
| is $200 a good deal for a NEW alltrax spm-48400 | Electric EZGO | |||
| NEW- Alltrax SPM-48400 Motor Controller | Golf Carts and Parts | |||
| Alltrax Install in club car | Electric Club Car | |||
Linear Mode
