2010 Precedent does nothing.

Sergio · 06-05-2018, 03:20 PM

When You said You "by-passed" the OBC, did You disconnect the 6-pin plug and jumped the Blue with the White wires on the cart harness-side connector?

The black wire with yellow bullet connector is to wire accessories on your 48v->12v reducer.

That 16v reducer is not good for the batteries.

NoleFan4Ever · 06-05-2018, 03:38 PM

Quote:

Originally Posted by tcapling

Battery - and then ran to a blck/white 18g in the harness near the obc in the battery compartment. Only has 2 wires that I saw.
There's also a 10g black just hanging out in the battery compartment. Noises where it should go either (currently has a bullet connector end on it)

Definitely your reducer. That last wire is probably to add an accessory. You can probe it to make sure.

tcapling · 06-05-2018, 03:41 PM

Yes, that is exactly how I bypassed it. Pulled the pins from the harmess side and used a set of gator clips to join temporarily.
Ok I thought that was a reducer. Thanks.

I'm not getting solenoid activation from the controller, nor does it do anything I'd I by pass the solenoid. Solenoid tests good.
Anything else I can test to be sure the controller is my issue?

NoleFan4Ever · 06-05-2018, 03:44 PM

Afraid not, you have pretty much proven a controller failure....

tcapling · 06-05-2018, 04:09 PM

Well at least my thought process has worked...

NoleFan4Ever · 06-05-2018, 06:23 PM

Quote:

Originally Posted by tcapling

Well at least my thought process has worked...

And with a very good job at it!

tcapling · 06-13-2018, 04:26 PM

Just to put an update - changed out the controller for a rebuilt one, everything works as it should now. (I hate when threads don't show what the solution was)

NoleFan4Ever · 06-13-2018, 04:33 PM

Good Job!!

06-05-2018, 03:20 PM	#11
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: 2010 Precedent does nothing. When You said You "by-passed" the OBC, did You disconnect the 6-pin plug and jumped the Blue with the White wires on the cart harness-side connector? The black wire with yellow bullet connector is to wire accessories on your 48v->12v reducer. That 16v reducer is not good for the batteries.

06-05-2018, 03:41 PM	#13
tcapling Not Yet Wild Join Date: Dec 2017 Location: Canada Posts: 24	Re: 2010 Precedent does nothing. Yes, that is exactly how I bypassed it. Pulled the pins from the harmess side and used a set of gator clips to join temporarily. Ok I thought that was a reducer. Thanks. I'm not getting solenoid activation from the controller, nor does it do anything I'd I by pass the solenoid. Solenoid tests good. Anything else I can test to be sure the controller is my issue?

06-05-2018, 03:44 PM	#14
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: 2010 Precedent does nothing. Afraid not, you have pretty much proven a controller failure....

06-05-2018, 04:09 PM	#15
tcapling Not Yet Wild Join Date: Dec 2017 Location: Canada Posts: 24	Re: 2010 Precedent does nothing. Well at least my thought process has worked...

06-13-2018, 04:26 PM	#17
tcapling Not Yet Wild Join Date: Dec 2017 Location: Canada Posts: 24	Re: 2010 Precedent does nothing. Just to put an update - changed out the controller for a rebuilt one, everything works as it should now. (I hate when threads don't show what the solution was)

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-13-2018, 04:33 PM	#18
NoleFan4Ever MOD of all BS! Join Date: Sep 2011 Location: Florida Posts: 17,477	Re: 2010 Precedent does nothing. Good Job!!

Similar Threads
Thread	Forum
2010 Precedent	Electric Club Car
Looking to Buy a 2010 Precedent	Electric Club Car
2010 precedent	Electric Club Car
2010 i2 excel precedent won't run	Electric Club Car
2010 precedent 48v	Electric Club Car