|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
06-21-2018, 06:37 PM
|
#1 |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
New diode and resistor no movement
What's going on here .. little upset when what i have works and i try to pit the correct parts on it dosnt work ... what am i missing
Edit Solenoid does not click either |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-21-2018, 06:58 PM
|
#2 |
|
Gone Insane
 Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: New diode and resistor no movement
What did you do? And why? What cart?
|
|
|
|
|
06-21-2018, 07:08 PM
|
#3 |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: New diode and resistor no movement
I was adding a new resistor and diode. Because of 48 volts... I think I found the problem .. blown inline fuse
|
|
|
|
|
06-21-2018, 07:13 PM
|
#4 |
|
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: New diode and resistor no movement
I'm not familiar with that solenoid, but the diode is directional.
|
|
|
|
|
06-21-2018, 07:18 PM
|
#5 |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: New diode and resistor no movement
So I replaced the fuse and it works .. count the new stuff as a loss and wait until something actually fails to replace it .. but thanks man for the imput
|
|
|
|
|
06-21-2018, 07:29 PM
|
#6 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: New diode and resistor no movement
I think the diode is backwards, aren't the blue wires positive?
|
|
|
|
|
06-21-2018, 07:40 PM
|
#7 |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: New diode and resistor no movement
I'm honestly not sure .. I went by the diagram supplied with the solenoid and well it didnt work lol
|
|
|
|
|
06-22-2018, 09:30 AM
|
#8 | |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: New diode and resistor no movement
Quote:
Honestly im not sure .. i wired it up as it was on my old solenoid and it works I have the old resistor on it now with out the diode and there is no issues |
|
|
|
|
|
06-22-2018, 10:04 AM
|
#9 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: New diode and resistor no movement
You can easily verify the polarity by putting your voltmeter on the two solenoid pins.
You need the new resistor and there is no reason not to use it. Without the diode you may damage your Controller and/or pedal micro-switch. I cannot think of any Series cart that has 2 negative wires on the Solenoid, but two positives are pretty common. If the diode was backwards it would immediately blow the fuse when you pressed the pedal. |
|
|
|
|
06-22-2018, 10:24 AM
|
#10 |
|
Gone Wild
Join Date: May 2018
Location: Florida
Posts: 501
|
Re: New diode and resistor no movement
Sergio i thank you .. when i get home tonight i will try it again with the diode switched up
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Problem with resistor, diode, or both? | Electric Club Car | |||
| 84 DS Resistor Cart no clicking and no movement | Electric Club Car | |||
| please help diode and resistor | Electric Club Car | |||
| Solenoid resistor and diode help | Electric EZGO | |||
| resistor/diode necessary | Electric EZGO | |||
Linear Mode
