|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-16-2019, 08:57 PM | #1 |
Getting Wild
Join Date: Aug 2010
Location: CO.River Valley,S.Central TX
Posts: 101
|
Remove and install SB50 Charger Connector
I have a 1994 EZGO (Model #08L94). I removed this connector(cart side) and disconnected the wires(5’ long)at the controller. Ordered a new SB 50 charger connector assembly w/harness..only problem is the wires are not that long. No way long enough to connect all the way to the controller. I am assuming that these shorter cables are supposed to connect to the positive on one battery and the negative to another battery located under the drivers seat. Will someone please correct me if I’m wrong, or confirm that this is correct with maybe a photo. I have taken really good care of these expensive batteries, and for sure DO NOT want to hook things up wrong and ruin them. Please advise and thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2019, 11:36 PM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: Remove and install SB50 Charger Connector
They should go to the positive and negative of the pack.
|
02-17-2019, 01:11 PM | #3 |
Getting Wild
Join Date: Aug 2010
Location: CO.River Valley,S.Central TX
Posts: 101
|
Re: Remove and install SB50 Charger Connector
Will someone please confirm that this is connected correctly.
|
02-17-2019, 02:01 PM | #4 |
Guest
Posts: n/a
|
Re: Remove and install SB50 Charger Connector
NO THAT IS WRONG !!!
THIS IS BATTERY SET UP |
02-17-2019, 02:05 PM | #5 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Remove and install SB50 Charger Connector
The cables from the charge receptacle need to be connected to the same battery terminals the B+ and B- cables to the controller are connected to.
As connected, they won't charge the battery pack. |
02-17-2019, 02:08 PM | #6 |
Guest
Posts: n/a
|
Re: Remove and install SB50 Charger Connector
THIS IS WHAT IT SHOULD BE
HEY JOHENNIE !!! |
02-17-2019, 02:11 PM | #7 |
Getting Wild
Join Date: Aug 2010
Location: CO.River Valley,S.Central TX
Posts: 101
|
Re: Remove and install SB50 Charger Connector
|
02-17-2019, 02:13 PM | #8 |
Guest
Posts: n/a
|
Re: Remove and install SB50 Charger Connector
look at photo i posted
|
02-17-2019, 02:26 PM | #9 |
Getting Wild
Join Date: Aug 2010
Location: CO.River Valley,S.Central TX
Posts: 101
|
Re: Remove and install SB50 Charger Connector
This is the SB 50 connector that I removed from the controller(5’ long)
The red & Black is the new SB 50 replacement I was sent. No way this will reach to the - & + posts in your drawing. Please explain. |
02-17-2019, 02:26 PM | #10 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Remove and install SB50 Charger Connector
Unhook everything and start over. Can't see everything you have done but you might have an explosion hazard.
Look at the diagram and CTD's photo. |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO sb50 to newer charger | Electric EZGO | |||
EZGO sb50 charge connector | Electric EZGO | |||
SB50 Charge connector | Electric EZGO | |||
change plug on Powerwise charger from new style to SB50? | Electric EZGO | |||
I have one charger with SB50 end and another with 2 prong connection | Electric EZGO |