Will txt run Yamaha series motor?

cumminsCJ · 04-01-2019, 05:33 PM

Both Carts are series. Shafts line up. Just don't want to damage the control. I had the Yamaha motor rebuilt for another build that got shelved. I have a couple of txt carts that need motors so figured now os a good time to put them to use if they are compatible. I had always heard they were but don't want to burn the controller.

yurtle · 04-01-2019, 06:51 PM

Do you know the model number of the original and the specs for the rebuild? I'd think the folks who did your rewind could tell you. My impression is that for series, the controllers give the motors voltage and limit amps, so should be the same. SepEx may be different. I Googled "Yamaha Series Motor" and found this, which is advertised as Yamaha and EZ-GO, which tells me splines "should" be the same, but better to confirm.

https://www.evdrives.com/product_p/mot-170-010-0002.htm

cumminsCJ · 04-01-2019, 08:45 PM

Motor is a plum quick bandit. I will give them a call in the morning. Thanks

cgtech · 04-02-2019, 03:44 AM

If your equipment met the specs for a "Ezgo upgrade motor" the other motor would be the same.. likewise if the motor specs says "requires upgrade controller and parts" it would still require upgrading. A motor generally knows not if it's on a Yamaha or Ezgo. (Not 100% perfect, because they run opposite directions). Yamaha motors typically point to "passenger side", while Ezgo motors point to "driver side". Or however you decide to look at it

04-01-2019, 06:51 PM	#2
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Will txt run Yamaha series motor? Do you know the model number of the original and the specs for the rebuild? I'd think the folks who did your rewind could tell you. My impression is that for series, the controllers give the motors voltage and limit amps, so should be the same. SepEx may be different. I Googled "Yamaha Series Motor" and found this, which is advertised as Yamaha and EZ-GO, which tells me splines "should" be the same, but better to confirm. https://www.evdrives.com/product_p/mot-170-010-0002.htm

04-01-2019, 08:45 PM	#3
cumminsCJ Not Yet Wild Join Date: Sep 2013 Posts: 34	Re: Will txt run Yamaha series motor? Motor is a plum quick bandit. I will give them a call in the morning. Thanks
cumminsCJ Not Yet Wild Join Date: Sep 2013 Posts: 34

04-02-2019, 03:44 AM	#4
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Will txt run Yamaha series motor? If your equipment met the specs for a "Ezgo upgrade motor" the other motor would be the same.. likewise if the motor specs says "requires upgrade controller and parts" it would still require upgrading. A motor generally knows not if it's on a Yamaha or Ezgo. (Not 100% perfect, because they run opposite directions). Yamaha motors typically point to "passenger side", while Ezgo motors point to "driver side". Or however you decide to look at it

Similar Threads
Thread	Forum
Will a 95 series motor and controller fit in a 94 series cart?	Electric EZGO
Trade high speed/torqe pds/dcs motor for series motor	Electric EZGO
Trade high speed/torque motor pds/dcs for series motor	Golf Carts and Parts
Club Car Series Controller + EZGO Series Wound Motor	Electric Club Car
Series motor for Yamaha G22 Rear End	Electric Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum