Installing Camo Vinyl Wrap this weekend, any pointers?

[cobraclay]

My vinyl wrap just arrived, I went with the "Mossy Oak New Break Up". Figured I would give it a go, this will be my first attempt @ a vinyl wrap. I picked up a heat gun from harbor freight, and will be jumping on it Sat afternoon, I will try to take some before and after pics. If anyone can chime in with some pointers that would be helpful, I purchased 2 - 4'x5' sheets. I did some preliminary layouts but if there is a recommended layout to get the best coverage and least amount of seams let me know. And what kind of overlap is recommended @ the seams? Thanks! Ill attach a before pic so yall can see what im working with. It will be transforming slowly, but hope to have it all done by hunting season opening day, August 15th!

[ekgguy]

Take your time. Make sure the cart is as clean as possible and then clean it again. Then wipe it down with denatured alcohol. Any dirt that gets under the wrap will look like a mountain when you are done. Only use the heat gun if you absolutely have to, and then dont heat it too much or you will blister the wrap.

I used a bondo spreader wrapped in felt cloth when I did the grill and front end on my Avalanche. Dont worry if you end up with a few bubbles in it when you are done. You can poke them with the smallest needle you can find (I used an insulin syringe) and squeegie them flat.

Good luck, and post pictures