|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-09-2012, 08:55 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 45
|
1994 plywood front seat measurement
My 1994 cc gas front seat has the plywood essentially 90% gone! The foam is still in pretty good shape. Could someone measure their plywwod base and post the measurements, I need to fabricate/ cut a new piece I assume its 1/2" plywood but not 100% sure.
Thanks Billy |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-10-2012, 07:02 AM | #2 | |
Not Yet Wild
Join Date: Dec 2010
Location: Virginia Beach, VA
Posts: 54
|
Re: 1994 plywood front seat measurement
Quote:
|
|
08-10-2012, 08:25 AM | #3 |
Redneck in Southside
Join Date: Jul 2010
Location: Spencer, Virginia
Posts: 1,252
|
Re: 1994 plywood front seat measurement
on a 95 its 15 1/2" x 40"
|
08-10-2012, 09:26 AM | #4 |
Not Yet Wild
Join Date: Jun 2011
Posts: 45
|
Re: 1994 plywood front seat measurement
Thanks so much!
Billy |
10-03-2012, 03:40 PM | #5 |
Not Yet Wild
Join Date: Jun 2011
Posts: 45
|
Re: 1994 plywood front seat measurement
I have a 1994 gas club car, the cushion itself measures about 19" at the middle by 41" at the middle. Do you think they changed the layout/design between 94 and 95? I would have to squeeze the snot out of that polyfoam to get it down to 15 1/2" the 40 inches is easy.
Thanks |
10-03-2012, 04:58 PM | #6 |
Not Yet Wild
Join Date: Jun 2011
Posts: 45
|
Re: 1994 plywood front seat measurement
Ok
So I went out and used my teenage son and his buddy and some clamps and squeezed the snot out of it and it fits perfectly on the 15 1/2" X 40" 1/2" plywood which is the original thickness of the factory piece. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Front Seat For TXT | Gas EZGO | |||
Front Seat Support | Gas EZGO | |||
F/S: 1994 Yamaha G9 Golf Cart with rear seat kit $675 - in CT | Golf Carts and Parts | |||
whats the difference between an 1987 and a 1994 ezgo front axel set up!!! | Garage and Workshop |