|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-10-2017, 08:05 AM | #1 |
Gone Wild
Join Date: Mar 2013
Location: DORR MI
Posts: 230
|
Only info is j38
pulled engine out of a cart ..... the body does not match the chasis so I don't really have more info.
could someone guide me on a possible frame tag or engine number? the only thing stamped in the block is J38 thanks in advance |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-10-2017, 08:47 AM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Only info is j38
G2 - GAS G2 - ELECTRIC
J38-000101 = 1985 J38-007101 = 1986 J38-020101 = 1987 J38-071101 = 1988 What makes you think it not the body for the frame/chassis? Can you post some pics of the cart |
04-10-2017, 09:45 AM | #3 |
Gone Wild
Join Date: Mar 2013
Location: DORR MI
Posts: 230
|
Re: Only info is j38
owner told me the body has been changed, the engine cradle is two separate pieces bolted to the front half of the block the other bolted on the rear of the block.
engine has something electrical in the bottom of the block...assuming oil shutdown. carb comes off on an angle. clutch has no spring just weights. also wondering if anyone has more info on tightening that clutch up....I can push it in by hand I also looked on the block for more numbers but wasn't able to see any yet. hopefully when I pull it out of the dishwasher here at work I can identify it..... why are rebuild so much more $$ than the others. |
04-10-2017, 03:05 PM | #4 |
Gone Wild
Join Date: Mar 2013
Location: DORR MI
Posts: 230
|
Re: Only info is j38
also......would this j38 come with the balancer shaft assembly? I opened this one up and there isn't one......
its an 84 - 95 |
04-10-2017, 05:14 PM | #5 |
Gone Wild
Join Date: Apr 2011
Location: New Jersey
Posts: 999
|
Re: Only info is j38
Look on the frame towards back or under bumper for stamped #
|
04-10-2017, 06:54 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Only info is j38
To find SN, fold seat forward , look in engine compartment at base of seat where it hinges. SN would be on a aluminum tag riveted to frame.
|
04-11-2017, 06:48 AM | #7 |
Gone Wild
Join Date: Mar 2013
Location: DORR MI
Posts: 230
|
Re: Only info is j38
thanks guys
|
04-11-2017, 08:46 AM | #8 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Only info is j38
Or stamped on the rear frame member the the rear bumper brackets bolt to. Someone has been into the engine. All Yamaha J38 engines came with a balancer. Probably it seized and damaged the hole were the balancer fit into the block.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Info | Electric EZGO | |||
need some info | Electric golf carts | |||
A little EZ GO info please? | Electric EZGO | |||
Need to know G1 INFO!!! | Gas Yamaha |