|
|
|||||||
| Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
  |
|
|
Thread Tools | Display Modes |
07-26-2022, 05:49 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2022
Posts: 4
|
Wire harness for Sepex controller
Hi, I got a 2010 Zone E Golf Cart with no wires. (Or what is left there)
I have searched everywhere but haven't had luck to find where to order the complete set of wire harness for the Sepex controller and accessories. See picture attached. Would you recommend to put in a new controller as well? We don't know if anything is working. We just wanted to re-wire everything new and see if it will run. Thank you |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-26-2022, 06:26 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Wire harness for Sepex controller
 WOWIt looks like a victim of favorite misconception. "Golf carts are cute and small so anybody can fix them. I just keep cutting wires until I eliminate the problem"  |
|
|
|
|
07-26-2022, 07:04 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,823
|
Re: Wire harness for Sepex controller
Just sent a wrecked 2010 ZONE to Copart. Cart flipped, bent a bunch of no longer readily available stuff so insurance totaled it. But everything is there. Was driving great till the owner's nephew hit a drainage ditch at speed. No idea when it will come up for auction. Just picked up yesterday (7/25) by the Fort Wayne Indiana Copart location.
|
|
|
|
|
07-27-2022, 08:07 AM
|
#4 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,131
|
Re: Wire harness for Sepex controller
That controller might be okay but I wouldn’t trust it to be. You would be better off just buying another controller with a matching harness.
|
|
|
|
|
07-27-2022, 09:18 AM
|
#5 | |
|
Not Yet Wild
Join Date: Jul 2022
Posts: 4
|
Re: Wire harness for Sepex controller
Quote:
 |
|
|
|
|
|
07-27-2022, 09:19 AM
|
#6 | |
|
Not Yet Wild
Join Date: Jul 2022
Posts: 4
|
Re: Wire harness for Sepex controller
Quote:
 |
|
|
|
|
|
07-27-2022, 09:23 AM
|
#7 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,131
|
Re: Wire harness for Sepex controller
An Alltrax XCT setup for an Ezgo 48txt with a stock harness should be easy to graft in.. Not sure what throttle you have but you can switch the controller to use that with the software
|
|
|
|
|
08-01-2022, 12:33 AM
|
#8 |
|
Not Yet Wild
Join Date: Jul 2022
Posts: 4
|
Re: Wire harness for Sepex controller
Do you know where I can find an Alltrax XCT setup with all the wire harness?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New wire harness and controller suggestions | Electric EZGO | |||
| New Navitas Controller -Where does the blue wire go on the charger harness? | Electric Club Car | |||
| RXV Disconnect Controller to Trace Wire Harness? | Electric EZGO | |||
| RXV wire harness ? | Electric EZGO | |||
| 2005 Club Car IQ Motor, Wire Harness, & Controller | Golf Carts and Parts | |||
Linear Mode
