87 ezgo solenoid

stockstill · 07-09-2009, 10:45 AM

Just bought someone's problems now there mine! Solenoid clicks when pushing on go pedal sometimes it will move if I keep pushing it several times! But now nothing. Please first ezgo ?????

master66 · 07-09-2009, 11:34 AM

If it were me after reading all of the great input from this forum I would go over all of the cable connections between the batteries, controller and motor to make sure they are all clean with no corrosion and all of the nuts are tight .That is the easiest stuff to check right now so I would start with that .Let us know what you find then we can all go from there .

stockstill · 07-09-2009, 11:47 AM

Yup I'm stupid, first timer! Thank's will let you know!!!!!

master66 · 07-09-2009, 12:14 PM

Ah don't be so hard on yourself, that is why we are all here to ask and answer questions.

stockstill · 07-12-2009, 06:15 AM

Ok everything checks out on being tight & everything is clean! I do see it was upgraded has a Curtis 1204 speed controller added & assuming speed assembly switch at go pedal. Is there a way I can bench test each of these so I can rule them out???

pggroves · 07-12-2009, 08:55 AM

What type of throttle potentiometer is installed?

07-09-2009, 10:45 AM	#1
stockstill Not Yet Wild Join Date: Jul 2009 Location: ST Pete Florida Posts: 6	87 ezgo solenoid Just bought someone's problems now there mine! Solenoid clicks when pushing on go pedal sometimes it will move if I keep pushing it several times! But now nothing. Please first ezgo ?????

07-09-2009, 11:34 AM	#2
master66 Gone Wild Join Date: May 2009 Location: Marysville Wa Posts: 699	Re: 87 ezgo solenoid If it were me after reading all of the great input from this forum I would go over all of the cable connections between the batteries, controller and motor to make sure they are all clean with no corrosion and all of the nuts are tight .That is the easiest stuff to check right now so I would start with that .Let us know what you find then we can all go from there .

07-09-2009, 11:47 AM	#3
stockstill Not Yet Wild Join Date: Jul 2009 Location: ST Pete Florida Posts: 6	Re: 87 ezgo solenoid Yup I'm stupid, first timer! Thank's will let you know!!!!!

07-09-2009, 12:14 PM	#4
master66 Gone Wild Join Date: May 2009 Location: Marysville Wa Posts: 699	Re: 87 ezgo solenoid Ah don't be so hard on yourself, that is why we are all here to ask and answer questions.

07-12-2009, 06:15 AM	#5
stockstill Not Yet Wild Join Date: Jul 2009 Location: ST Pete Florida Posts: 6	Re: 87 ezgo solenoid Ok everything checks out on being tight & everything is clean! I do see it was upgraded has a Curtis 1204 speed controller added & assuming speed assembly switch at go pedal. Is there a way I can bench test each of these so I can rule them out???

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-12-2009, 08:55 AM	#6
pggroves steeplejack x Join Date: Jan 2007 Location: Republic of Texas Posts: 3,382	Re: 87 ezgo solenoid What type of throttle potentiometer is installed?

Similar Threads
Thread	Forum
Do I have a bad Solenoid '88 EzGo	Electric EZGO
How many AMPS is a Gas Powered EZGO solenoid?	Gas EZGO
95 EZGO Solenoid Melter	Electric EZGO
ezgo solenoid help	Gas EZGO
EZGO 2003 solenoid wont click.	Electric EZGO