|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-02-2010, 11:49 AM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 6
|
need marathon reed valve block
i am looking for A 1990 reed valve block assembly. everywhere i have checked i have had no luck. any suggestions?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-06-2010, 04:52 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2010
Posts: 3
|
Re: need marathon reed valve block
I had the same problem. I bought a reed valve assembly from a Yahama DT-1 250 bike. It has the same vertical spacing but the horizontal spacing is too wide. I used a round file and filed the holes until they lined up with the intake manifold. I put it on the cart and she fired right up.
I chose the DT-1 because it has bolt pattern of the Robin unit and has only 2 reed petals and visually has more space (room to adjust as needed) between the bolt holes and the reed cage body than the units with three petals. The units with three petals the cage looks wider and may not fit into the jug of the engine. I have been using this modified setup a short time with no problems. |
|
|
|
|
08-28-2010, 11:40 AM
|
#3 |
|
EZ Like Sunday Morning
Join Date: Jun 2009
Location: Owatonna, Minnesota
Posts: 465
|
Re: need marathon reed valve block
Got one from a 2pg, let me know if that is what you have?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| WTB: Reed Valve unit - 3PG | Golf Carts and Parts | |||
| What Is A Reed Valve | Gas EZGO | |||
| 90 Marathon to Big Block | Big Block Talk! | |||
| Big Block in '86 Marathon? | Big Block Talk! | |||
| ? for anyone.. reed switch | Electric EZGO | |||
Linear Mode
