lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-07-2013, 06:27 PM   #1
Dadsbaby
Getting Wild
 
Dadsbaby's Avatar
Yamaha
 
Join Date: Sep 2012
Location: INDY
Posts: 105
Default Impact primary clutch bolt out??

I had planned on using my impact on the primary clutch bolt but it looks like the frame is in the way, so how do you guys get to it? My puller is on the way from Plowmans, done got the secondary sheave kit from them, not installed yet and clutch is going to be sent to them to be redone as soon as I get it off. Pulled the carb to make sure jets were clean..the two inside were clean but there's one on the outside on top of the carb that appears to be clogged..can't see daylight thru it or able to get bread tie thru it either. I'm not sure what that jet is for, I've done plenty of carb work but never seen one on the outside like this. Does the hole go all the way thru? The way it's made looks like it should.
Dadsbaby is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-07-2013, 06:45 PM   #2
yamarancher
Gone Wild
 
yamarancher's Avatar
Yamaha
 
Join Date: Nov 2011
Posts: 232
Default Re: Impact primary clutch bolt out??

On the clutch, I just take the bolts out of the top shock mounts & lower my buggy. If its stock it should come off without doing this.
yamarancher is offline   Reply With Quote
Old 04-07-2013, 07:50 PM   #3
abieex
Gone Loco
 
abieex's Avatar
Yamaha
 
Join Date: Aug 2012
Location: Cuyahoga Falls, Ohio
Posts: 722
Default Re: Impact primary clutch bolt out??

Me too!
abieex is offline   Reply With Quote
Old 04-07-2013, 08:24 PM   #4
Dadsbaby
Getting Wild
 
Dadsbaby's Avatar
Yamaha
 
Join Date: Sep 2012
Location: INDY
Posts: 105
Default Re: Impact primary clutch bolt out??

Ok thank you, never even thought about that! Don't know what I would do without these forums. lol
Dadsbaby is offline   Reply With Quote
Old 04-08-2013, 08:29 PM   #5
Dadsbaby
Getting Wild
 
Dadsbaby's Avatar
Yamaha
 
Join Date: Sep 2012
Location: INDY
Posts: 105
Default Re: Impact primary clutch bolt out??

Does anyone know about the jet I'm talking about? It's the one on the outside of the carb, not sure if its plugged or if its made that away. I can't see them making a jet on the outside like that with a hole for gunk to get in.
Dadsbaby is offline   Reply With Quote
Old 04-08-2013, 10:47 PM   #6
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,252
Default Re: Impact primary clutch bolt out??

The one on the outside is an internal "air mixer", it's not supposed to pass air through to the outside of the carb. all that's important on that one is that air passes through the bottom hole out the 3 side holes. if it is clogged, hard starting and low/mid speed power will suck.
cgtech is offline   Reply With Quote
Old 04-09-2013, 04:23 AM   #7
Dadsbaby
Getting Wild
 
Dadsbaby's Avatar
Yamaha
 
Join Date: Sep 2012
Location: INDY
Posts: 105
Default Re: Impact primary clutch bolt out??

Thank you cgtech..that's a relief, I was trying to unclog the darn thing.
Dadsbaby is offline   Reply With Quote
Old 04-12-2013, 08:11 PM   #8
Dadsbaby
Getting Wild
 
Dadsbaby's Avatar
Yamaha
 
Join Date: Sep 2012
Location: INDY
Posts: 105
Default Re: Impact primary clutch bolt out??

Thanks to you guys I got my clutch out with no problems. I did end up getting Plowmans power kit with the orange spring..Man was that a tuff spring to get back on. My brother and I with the 3' pry bar had a heck of a time! Tried ratcheting straps and all..in the end the pry bar was the tool to use, I could not keep the straps from sliding off when trying them. I was never so glad to see something finished, clutch redone and probably be here Mon or Tue, can't wait to get it together and hook my trailer up to clean the limbs out of yard.
Dadsbaby is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
primary clutch bolt size Gas Yamaha
Primary clutch bolt torque Gas Yamaha
Getting primary clutch apart? Gas Club Car
What size thread for Primary Puller Bolt? Gas Yamaha
96 DS stock drive clutch bolt size (exterior bolt) Gas Club Car


All times are GMT -5. The time now is 07:40 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.