2000 DS wheel breaing replacement help.

[AubAlum0509]

I have a wheel bearing go bad on my 2000 Club Car DS (Electric). I ordered some new bearing from online. I went ahead and got enough parts to do both front hubs. I ended up with 4 bearings, 4 erases, and 2 dust/grease seals. The bearings and hubs are marked differently. This is exactly what I got.

2x Bearings - Part No. LM11949
2x Erases - Part No. LM11910

2x Bearings - Part No. LM11949-Q
2x Erases - Part No. LM11910-Q

2x Seals - Part No.

I am not sure why 2 of the bearings have a "Q" at the end of the part number. Are these the same bearings? When shipped, they were in pairs, the 2 without a Q, and the 2 with a Q.

Does the Q have to go on the inside of hub? Or outside maybe? I am confused as to why they would be different part numbers. Here is the link to the purchased items. http://www.ebay.com/itm/401266962383...%3AMEBIDX%3AIT Of course the stock photo on Auction page shows 4 bearing with the LM11949, and 0 with the LM11949-Q part number. Laid next to each other, they look identical. I haven't put calipers on them, or test fit them to spindle.

Thanks!

[AubAlum0509]

Also, Is there an schematic, or parts diagram for my cart, that someone could link for me to save, or maybe .pdf download of all parts.

[Aflyer]

AubAlum0509,
I can't help you with those part numbers. But attached is a parts list document that I find real helpful.

Aflyer

[Devil1]

I recently changed the front wheel bearings on my 99 club car Ds. The bearings I used were Timken SET2. I didn't notice any difference between them and just installed them. My cart does over 40mph and I've had no issues.