|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-02-2017, 06:54 AM
|
#1 |
|
Not Yet Wild
 Join Date: Apr 2014
Location: Western Pennsylvania
Posts: 59
|
Alltrax XTC install IQ
I wanted to show my progress with this retrofit. Not sure if this subject is repeated. I looked through and found very few posts .
I am wondering about a few control wires shown in my pics. The red wire , the four pin connector, the black wire? Any input is welcome. 20170502_073744.jpg 20170502_073801.jpg Sent from my SCH-I535 using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-02-2017, 09:32 AM
|
#2 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Alltrax XTC install IQ
I don't see the black wire you're speaking of. I see a blue one... It's the hot feed for headlights and should remain unchanged from the OEM controller to this one. The red wire will go to the battery side of the solenoid large post.
|
|
|
|
|
05-02-2017, 11:51 AM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2014
Location: Western Pennsylvania
Posts: 59
|
Re: Alltrax XTC install IQ
I think the blue and black #10 size wires are for 12v to lights as shown in pic 1. Also think there is a jumper nessesary on the six pin computer plug? The plug is shown on pic 4. 20170502_124219.jpg20170502_124234.jpg20170502_124328.jpg20170502_124151.jpg
Sent from my SCH-I535 using Tapatalk |
|
|
|
|
05-02-2017, 01:41 PM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2014
Location: Western Pennsylvania
Posts: 59
|
Re: Alltrax XTC install IQ
Ok , I have all wiring done . except power to lights. I powered up the system with the wheels off the ground. I see a steady green light until I hit the gas . the motor jitters a bit . when applying throttle I'm getting one green two red. that means low voltage. I have 50 volts. On power up the green light flashes 4 times then solid green. the controller thinks its a different cart. my club car should have seven green flashes on power up.
|
|
|
|
|
05-02-2017, 01:59 PM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Alltrax XTC install IQ
What is the pack voltage right now? and did the cart drive into the upgrade area?
|
|
|
|
|
05-02-2017, 02:02 PM
|
#6 |
|
Not Yet Wild
Join Date: Apr 2014
Location: Western Pennsylvania
Posts: 59
|
Re: Alltrax XTC install IQ
50 volts. cart has not moved off the jack
|
|
|
|
|
05-02-2017, 02:41 PM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2014
Location: Western Pennsylvania
Posts: 59
|
Re: Alltrax XTC install IQ
Do I need to hook up the black 10 gauge wire to B-?20170502_124219.jpg
Sent from my SCH-I535 using Tapatalk |
|
|
|
|
05-02-2017, 03:06 PM
|
#8 | |
|
Not Yet Wild
Join Date: Apr 2014
Location: Western Pennsylvania
Posts: 59
|
Re: Alltrax XTC install IQ
Quote:
 |
|
|
|
|
|
05-02-2017, 04:30 PM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Alltrax XTC install IQ
Okay - So lots of unknowns. Lets start with a battery pack check.
2 questions = What is the pack voltage at rest and what does that reading drop to when you are trying to go but the cart is only shuddering & not going. |
|
|
|
|
05-02-2017, 04:36 PM
|
#10 |
|
Not Yet Wild
Join Date: Apr 2014
Location: Western Pennsylvania
Posts: 59
|
Re: Alltrax XTC install IQ
Great news! I called Alltrax tech support and quickly found the problem . The diode was backwards not allowing the solenoid to close. All is good in the hood.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax XCT 500 Amp install | Electric Club Car | |||
| Alltrax xct install | Electric Club Car | |||
| Help with alltrax install | Electric EZGO | |||
| Alltrax install in G22? | Extreme DC! | |||
| help with alltrax DCX install | Electric Club Car | |||
Linear Mode
