|
12-02-2008, 10:58 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2008
Location: Texas
Posts: 12
|
shift cable gas club car
installed a new cable on my 99 it hits shock mount; the old cable had a large dent at that spot which made it hard to shift.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-03-2008, 11:29 AM
|
#2 |
|
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: shift cable gas club car
Welcome to the forum 210tomm..................
|
|
|
|
|
12-04-2008, 11:05 AM
|
#3 |
|
just leave me alone
 Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: shift cable gas club car
so , Tomm ;
is your problem now resolved with the new Cable ? |
|
|
|
|
12-05-2008, 02:42 PM
|
#4 |
|
Not Yet Wild
Join Date: Mar 2008
Location: Texas
Posts: 12
|
Re: shift cable gas club car
no the new one still rubs looks like its time to grind off a corner of the mount
|
|
|
|
|
12-05-2008, 02:52 PM
|
#5 |
|
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: shift cable gas club car
You sure you got the correct cable? There are 2 different cables for CC gassers. Do you know for sure that you have a 99? oem part # 1019515-01 for 1998 and up...
|
|
|
|
|
|
|
|
12-05-2008, 03:51 PM
|
#6 |
|
Not Yet Wild
Join Date: Mar 2008
Location: Texas
Posts: 12
|
Re: shift cable gas club car
it appears that the rear cable mount was bent sometime before I got it I. Not sure if I got it straight might have to find a new one the old cable matched the new one.
|
|
|
|
|
12-05-2008, 05:08 PM
|
#7 |
|
just leave me alone
Join Date: Aug 2008
Location: Tennessee
Posts: 5,643
|
Re: shift cable gas club car
But you already said the old one was also rubbing , which means the old one could have also been incorrect if the previous owner replaced. So go with mike's request and check the part nmber of what you ordered could save U some time , or not.
|
|
|
|
|
12-05-2008, 07:21 PM
|
#8 |
|
Not Yet Wild
Join Date: Mar 2008
Location: Texas
Posts: 12
|
Re: shift cable gas club car
the cable part number and pictures (the newer cable has a metal sleeve) shown match and the serial number says '99 the only left is the bracket which I suppose is a dealer only part.
|
|
|
|
|
12-05-2008, 11:40 PM
|
#9 |
|
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: shift cable gas club car
I believe you will find the problem to be caused by the lift kit. You can remove the bolts holding on the shifter cable bracket to the trans and put 3 washers between mount and trans on one bolt and 2 washers between the other bolt and none behind the last bolt. When you tighten them up the bracket will not be under the shock mounting tab anymore.
|
|
|
|
|
12-22-2008, 09:36 PM
|
#10 |
|
Not Yet Wild
Join Date: Mar 2008
Location: Texas
Posts: 12
|
Re: shift cable gas club car
The washers worked
Thanks |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| ezgo shift cable adjustment? | Gas EZGO | |||
| txt shift linkage problems | Gas EZGO | |||
| Club Car Battery Cable - Pictures | Gas Club Car | |||
| shift eez | Gas Yamaha | |||
Linear Mode
