|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-25-2015, 09:14 PM | #1 |
Not Yet Wild
Join Date: Oct 2015
Posts: 3
|
Starter swith Yahama G2a
Looking to use a universal starter switch on my G2. The previous owner broke the switch and I have this 4 wire switch and not sure what a few of the wires are for. There is a black wire , red wire , brown wire and black/red wire from the harness from the cart. was going to cut the old switch out and use that harness for the new universal switch. Just need help for what wires go where. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-26-2015, 02:30 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Starter swith Yahama G2a
Two of the wires are to momentarly light the "low oil" light when switch is turned on to verify it is functional. G2 service manual is available on this site.
|
10-26-2015, 04:18 PM | #3 |
Not Yet Wild
Join Date: Oct 2015
Posts: 3
|
Re: Starter swith Yahama G2a
Do I have to hook up those 2 wires? Or can u just use the 2 for the start
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Plug Under F&R Swith (Rocker Swith) | Electric Club Car | |||
Ezgo RXV forward revese swith sticking | Electric EZGO | |||
Need yahama GURU or a good yahama service guy to repair cart | Gas Yamaha | |||
Universal Turn Signal Swith for Forward/Reverse | Electric EZGO | |||
forward/reverse swith | Electric EZGO |