04-19-2019, 11:43 AM | #1 |
Not Yet Wild
Join Date: Dec 2018
Posts: 40
|
Club Car DS
I just replaced my regulator but my golf cart wont crank over when I put it in drive but if I step on the accelerator it starts cranking and then I drive it, and no I checked to see if I put it in serves mode. Is it maybe because I hooked the wires wrong. I could not find a good diagram on how to put it together.
Sent from my SM-N950U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-22-2019, 07:43 AM | #2 |
Gone Wild
Join Date: Dec 2017
Location: Portsmouth, VA
Posts: 626
|
Re: Club Car DS
replaced the voltage regulator ??
did you mess with any other wires, connectors, etc ??? |
04-23-2019, 04:48 AM | #3 |
Not Yet Wild
Join Date: Dec 2018
Posts: 40
|
Re: Club Car DS
I unplugged all the wires that go to the switches
Sent from my SM-N950U using Tapatalk |
04-23-2019, 06:40 AM | #4 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Club Car DS
|
04-23-2019, 06:56 AM | #5 |
Not Yet Wild
Join Date: Dec 2018
Posts: 40
|
Re: Club Car DS
|
04-23-2019, 06:06 PM | #6 |
Not Yet Wild
Join Date: Dec 2018
Posts: 40
|
Re: Club Car DS
I tried it and all the wires are ok but but still the same issue, the only thing I forgot to mention is that when it comes on it wants to move forward even though I have the golf cart in neutral.
Sent from my SM-N950U using Tapatalk |