lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 04-29-2020, 09:15 PM   #1
KRAZYMATT
Gone Wild
Club Car
 
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
Default ISO Drive clutch starter pulley

Does anyone know a part number or where to get starter belt pulley that bolts to the back of the drive clutch? Mine was removed at some point and I cannot find it in my garage. Anyone have a bad clutch they could remove it from? Clutch is off a 97 ds


Update: got part number from David Hicks / revolution carts. 1012824. He can order but lookin for some used / cheaper as I just want it to start my old kf82 motor to make sure still runs before I try to part with it- it’s been sitting for 8 years...
KRAZYMATT is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 04-29-2020, 09:57 PM   #2
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,625
Default Re: ISO Drive clutch starter pulley

I'll check tomorrow but I think I have a couple of them in one of my bins. I've seen smaller ones and bigger ones. Is there a specific one you need? I'm pretty positive I have a smaller one I took off a new clutch and replaced it with my old one because it was a larger size, may have a large one too.
CP241 is offline   Reply With Quote
Old 04-29-2020, 10:15 PM   #3
KRAZYMATT
Gone Wild
Club Car
 
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
Default Re: ISO Drive clutch starter pulley

I think it was 6”
KRAZYMATT is offline   Reply With Quote
Old 04-30-2020, 01:26 PM   #4
KRAZYMATT
Gone Wild
Club Car
 
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
Default Re: ISO Drive clutch starter pulley

Found a 5-1/2” at local hardware store and popped the holes on Bridgeport to mount to clutch. Should work for what I need just wanting to be able to try to start my kf82 that been sitting... just had to pop the 3 mounting holes it’s 3” bolt circle and bored 2” hole in center to remove the hub that was on it and clear the hub of the clutch.





KRAZYMATT is offline   Reply With Quote
Old 04-30-2020, 07:05 PM   #5
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,625
Default Re: ISO Drive clutch starter pulley



The one I have is the larger 7" from a FE350. They used a slightly larger pulley I believe to help take some of the load off the starter/generator
Attached Images
File Type: jpg 20200430_194725.jpg (183.8 KB, 0 views)
CP241 is offline   Reply With Quote
Old 04-30-2020, 07:24 PM   #6
KRAZYMATT
Gone Wild
Club Car
 
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
Default Re: ISO Drive clutch starter pulley

Quote:
Originally Posted by CP241 View Post


The one I have is the larger 7" from a FE350. They used a slightly larger pulley I believe to help take some of the load off the starter/generator
How much, I’d be interested in the proper one potentially I just wanted to crank this thing over this weekend if I get time also cannot find my adjustment arm/ tensioner.
KRAZYMATT is offline   Reply With Quote
Old 04-30-2020, 07:56 PM   #7
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,625
Default Re: ISO Drive clutch starter pulley

Shoot me a PM :)

Is the adjustment arm the same as a FE290? I may have one of those as well if it's still on the side case cover in my bucket.
CP241 is offline   Reply With Quote
Old 11-14-2022, 08:02 PM   #8
huskers360
Not Yet Wild
 
Join Date: Jun 2022
Posts: 9
Default Re: ISO Drive clutch starter pulley

Do you happen to have one of these pulley's I could buy off you? 1014289

thanks!
huskers360 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
95 club car starter pully removal Gas Club Car
Starter Pully Clone Engine Swaps
CC Drive Clutch and Starter Gen Golf Carts and Parts
Diy g1 clutch pully Gas Yamaha
G9 starter/gen and stock drive clutch Golf Carts and Parts


All times are GMT -5. The time now is 12:21 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.