|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-28-2013, 09:26 PM
|
#1 |
|
Gone Wild
 Join Date: Feb 2013
Location: Plant City, FL
Posts: 2,212
|
Help with choosing cables.
Hey guys. I need a little help on determining what cables I need for my project. Since i'm putting the engine out of a 1999 Workhouse into a 2004 MPT which was originally electric, i'm not sure which accelerator and throttle cables I will need. The Workhorse is 12" longer, I thought of using the cables from the gas version 2004 MPT but i'm not sure if the connecting ends are the same. Any help will be greatly appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-29-2013, 10:55 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2013
Location: Plant City, FL
Posts: 2,212
|
Re: Help with choosing cables.
These cables are from the gas version of the 2004 MPT 800. I'm hoping they will connect to the older components on the 1999 motor.
http://www.shopezgo.com/products/Thr...roduct_id=1441 http://www.shopezgo.com/products/Acc...roduct_id=1434 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Help choosing a cart | Lifted Golf Carts | |||
| Choosing the right cart? | Lifted Golf Carts | |||
| Choosing new batterries.... | Electric Club Car | |||
| Choosing a new OBC | Electric Club Car | |||
| what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO | |||
Linear Mode
