|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-21-2018, 10:30 AM | #1 |
Not Yet Wild
Join Date: Aug 2018
Posts: 7
|
Breeze Easy II Fan Switch
I am replacing a 3 speed fan switch (off, low, med, high) on my Breeze Easy II. I have a 36 v EZGO Cart. Unfortunately, I did not note the wiring on the switch before I remove it. There is a black and red wire from the batteries, the switch has 2 red, 1 blue and 1 black wire and the motor has a red and black wire. Would someone have the schematic for the switch (stamped with SPD-DRV-01 on the board) or be able to assist me in reconnecting correctly?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-21-2018, 11:25 AM | #2 |
Gone Wild
Join Date: Jan 2013
Location: Saint Petersburg, FL
Posts: 2,089
|
Re: Breeze Easy II Fan Switch
Easiest way is to contact the vendor who sold you the switch, they may have the wiring diagram.
Or they may be able to give you the contact info for the manufacturer. I did a search online and found a lot of people selling the fan, but nobody replacing the built in switch. I found the club car installation .PDF file but there was no email or phone number in there for the manufacturer or for support. All they said was to refer questions to your local club car dealer. |
08-21-2018, 11:33 AM | #3 |
Not Yet Wild
Join Date: Aug 2018
Posts: 7
|
Re: Breeze Easy II Fan Switch
Thank you for the response. I too did an internet search no had no luck.
|
08-21-2018, 03:12 PM | #4 |
Gone Wild
Join Date: Aug 2012
Location: Houma, Louisiana
Posts: 950
|
Re: Breeze Easy II Fan Switch
I installed one on my cart last weekend. I'll look this afternoon to see whether on not the wires are visible (I only recall seeing the red and black for power, but I'll check and report back).
|
08-21-2018, 03:22 PM | #5 |
Not Yet Wild
Join Date: Aug 2018
Posts: 7
|
Re: Breeze Easy II Fan Switch
Yes the unit has a red and black wire. Inside where the switch is located the 2 red one blue and one black is on the speed control switch
|
08-23-2018, 08:52 AM | #6 |
Not Yet Wild
Join Date: Aug 2018
Posts: 7
|
Re: Breeze Easy II Fan Switch
Here is a pic of the switch
IMG_0741 (1).jpg |
08-23-2018, 09:40 AM | #7 |
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: Breeze Easy II Fan Switch
Use your DMM to check which wire has continuity on each switch setting
|
08-23-2018, 09:42 AM | #8 |
Not Yet Wild
Join Date: Aug 2018
Posts: 7
|
Re: Breeze Easy II Fan Switch
Thanks for the reply but I do not know how to do what u are suggesting
|
08-23-2018, 09:55 AM | #9 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Breeze Easy II Fan Switch
Flip the board and look at the circuit traces to check if the 2 red wires are soldered to the same trace.
If so, my best guess is: Red + Black = 12v in. |
08-23-2018, 10:32 AM | #10 |
Not Yet Wild
Join Date: Aug 2018
Posts: 7
|
Re: Breeze Easy II Fan Switch
The two reds appear to be sodered together. Does it matter which red one goes to battery and motor ?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
polaris breeze | Electric golf carts | |||
Marathon Brake Switch - Easy Install | Electric EZGO | |||
Easy to add in a relay to turn on spare battery with key switch? | Electric EZGO | |||
Easy behind dash & key switch access 01 TXT | Electric EZGO | |||
Yamaha 125 breeze | Bike & ATV Engine Swaps |