|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-24-2019, 07:09 PM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 37
|
Solenoid with XCT500
Purchased an Executioner motor, XCT500, and 2g cable set from Plum Wuick. Parts arrived and the included solenoid is the Curtis/Albright SW180-93 which looks like it’s only rated for 200 amps. Will this solenoid work or did they send me the wrong one?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-24-2019, 07:16 PM | #2 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Solenoid with XCT500
It will work but I think most of us would recommend the 400A solenoid for that setup...
|
05-24-2019, 08:05 PM | #3 |
Gone Wild
Join Date: Jan 2019
Posts: 150
|
Re: Solenoid with XCT500
Alltrax needs to get their poop in a pile. If you read their manual it should be fine. Read their schematic and no it should be 400amp. Your guess is as good as anyone’s giving their documents.
|
05-24-2019, 08:07 PM | #4 |
Gone Wild
Join Date: Oct 2014
Location: Fort Worth, Tx
Posts: 500
|
Re: Solenoid with XCT500
Call them and insist on a 400a.
Sent from my SM-G892A using Tapatalk |
05-24-2019, 10:53 PM | #5 | ||
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Solenoid with XCT500
Quote:
Quote:
If you cal Robbie at PQ, he will make it right..... And that was expensive thru them..... But you did get a pretty ring!! :o) |
||
05-25-2019, 07:48 AM | #6 |
Not Yet Wild
Join Date: Jun 2016
Posts: 37
|
Re: Solenoid with XCT500
Didn't even get the ring! I've been bamboozled!
|
05-25-2019, 07:50 AM | #7 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Solenoid with XCT500
|
05-25-2019, 09:13 AM | #8 |
Not Yet Wild
Join Date: Jun 2016
Posts: 37
|
Re: Solenoid with XCT500
I’d happily settle for just the proper solenoid over the ring!
I figured I’d be paying more getting all my parts through them, but thought I’d be getting a little piece of mind ensuring that I got all the correct parts which would work properly together. So much for that. Thanks everyone for the replies. |
05-26-2019, 09:29 AM | #9 |
Gone Wild
Join Date: Aug 2016
Location: Galveston, Texas
Posts: 720
|
Re: Solenoid with XCT500
I use this exact same setup on many of my builds, but always use a 400a solenoid with it.
|
05-26-2019, 04:13 PM | #10 |
Not Yet Wild
Join Date: Jun 2016
Posts: 37
|
Re: Solenoid with XCT500
I received the following message from Robby:
The SW180 has much larger contacts and while rated at 200 amps, will handle well over that. I run this same contactor pushing over 1,000 amps. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax xct500 Questions | Electric EZGO | |||
Precedent XCT500, MZJ400A Install - Solenoid activation issues | Electric Club Car | |||
ALLTRAX XCT500 and D&D 170-502-0001 | Electric EZGO | |||
Xct500 precedent mot-a2 Issues | Electric Club Car | |||
Xct500 | Electric EZGO |