2000 ezgo problems

[PhillipNichols]

I have a 2000 Ezgo txt that will barely move in the forward position but drives fine in reverse. It is a DCS Cart. The solenoid click every time the pedal is pressed.

Replacement parts so far.
2019 batteries, resting voltage on the pack is 38.35
Controller was replaced a few years ago
2019 replacement motor

Any feedback would be great?
I am also wondering if the motor was replaced with the wrong series motor. The part # on the replacement motor is a95-4005b. Any help would be great.

Thanks

[LabRat]

I dont know , but it sure sounds like the controller to me, try swapping the F1 & F2 at the controller to see if the forward is fast and reverse is slow

[JohnnieB]

Originally Posted by PhillipNichols

I have a 2000 Ezgo txt that will barely move in the forward position but drives fine in reverse. It is a DCS Cart. The solenoid click every time the pedal is pressed.

Replacement parts so far.
2019 batteries, resting voltage on the pack is 38.35
Controller was replaced a few years ago
2019 replacement motor

Any feedback would be great?
I am also wondering if the motor was replaced with the wrong series motor. The part # on the replacement motor is a95-4005b. Any help would be great.

Thanks

Some conflicting information:

1999 was the last year for DCS drive carts. A 2000 would be either a PDS drive or a series drive.

Both DCS and PDS drives use sepex motors and the motor part number is fro a series wound motor.

[PhillipNichols]

It ended up being the motor. The owner before replaced the motor and it wasn’t the right one. Put the right motor on and it works just fine.
Thanks