|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-20-2019, 10:46 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2019
Posts: 1
|
4 gauge upgrade question
Hello all, I recently upgraded all my battery cables to 4 gauge and also upgraded the positive and negative cables coming off of the batteries. My question is the other cables that go to the forward reverse switch and also to the motor are still six gauge since those didn't come with my kit. Do I need to replace all those cables as well? Or is the way I have it okay? Controller and motor is all stock but I do have a lift kit with larger tires. I also upgraded the forward and reverse switch to a heavy duty version because I was getting a really bad burning smell. Thank you in advance for any help
Sent from my SM-G955U using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-20-2019, 11:16 AM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 4 gauge upgrade question
All 13 (or 14 if your controller has a A2 terminal) need to be 4Ga or thicker.
They are connected in a series loop and the same battery amps travel through all of them. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2 Gauge Wiring Upgrade - DIY??? | Electric EZGO | |||
| Upgrade all cables to 4 gauge on Yamaha G2E? | Electric Yamaha | |||
| 2 Gauge upgrade question | Electric EZGO | |||
| Which wires to Upgrade to 2 Gauge | Electric Club Car | |||
| WHat cables need changed? 4 gauge upgrade | Electric EZGO | |||
Linear Mode
