|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-07-2014, 07:59 PM | #11 |
Getting Wild
Join Date: Sep 2013
Location: Western Pa
Posts: 107
|
Re: click but no go !!!! help
Batteries are all good. Motor was redone at plum quick. I jumped the solenoid an the motor ran so I think that is good. Limp mode ?? I guess the controller goes to low voltage. Flashes I think 6 times red. Just weird all was good now solenoid seems to be working backwards now ??
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-07-2014, 08:00 PM | #12 |
Getting Wild
Join Date: Sep 2013
Location: Western Pa
Posts: 107
|
Re: click but no go !!!! help
By the way each battery is at 8.4 volt an total pack is 50.6
|
05-07-2014, 08:18 PM | #13 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: click but no go !!!! help
|
05-07-2014, 08:24 PM | #14 |
Getting Wild
Join Date: Sep 2013
Location: Western Pa
Posts: 107
|
Re: click but no go !!!! help
About 6 months
|
05-07-2014, 08:32 PM | #15 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: click but no go !!!! help
Solenoid will ether work or not, if with no pedal you should have the hot on the side that goes to the controller at 0 volts. Hammer the go pedal and you should have full voltage reading from that plus to negative. If so then you can consider the controller or the speed control last the motor new motor or not it still can have an issue. Being you swapped controllers probably not that.
|
05-07-2014, 08:36 PM | #16 |
Getting Wild
Join Date: Sep 2013
Location: Western Pa
Posts: 107
|
Re: click but no go !!!! help
That's the problem no pedal hot to controller have 50 volts hit the pedal an voltage goes to 0
|
05-07-2014, 08:40 PM | #17 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: click but no go !!!! help
Is the mcor 0-5k or the opposite on your model?
|
05-07-2014, 08:42 PM | #18 |
Gone Wild
Join Date: Jan 2014
Location: Lafayette, Louisiana
Posts: 1,677
|
Re: click but no go !!!! help
What are you reading on the other side of the solenoid to negative?
|
05-07-2014, 08:45 PM | #19 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: click but no go !!!! help
This is a 99 cart. Everything 1996.5 & up was 5k-0
Maybe the solenoid is making a click but not really closing. Remove the external precharge resistor for these tests. Before the solenoid clicks you should have 50 V on the large posts with the battery cable going to the battery pack. After the solenoid clicks you should have 50 V on both large terminals Of the solenoid. The solenoid is an on-off switch for the big cables. Be sure you are getting 50 V across the two small terminals when you try to go. If not, the solenoid will not function and this is your problem. |
05-07-2014, 08:46 PM | #20 |
Getting Wild
Join Date: Sep 2013
Location: Western Pa
Posts: 107
|
Re: click but no go !!!! help
I believe its 0-5k. It has the vglide or pie what ever you want to call it i cleaned all the brass contacts . Voltage on the other side is the same.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
RXV 2009 click click but won't move | Electric EZGO | |||
G9 all we get is a Click | Electric Yamaha | |||
No click, click, when I hook up my charger? | Electric Club Car | |||
Click Click - will not move ! | Electric EZGO | |||
no click | Electric Club Car |