2006 TXT Solenoid Diode

[Coon Urine]

Anyone?

[JohnnieB]

Originally Posted by Coon Urine

Ok i checked them and they checked out ok. I also checked the motor. I get battery pack voltage on s1 and s2. I get nothing on a1 or a2. When solenoid clicks it ohms out on a1 and a2. What does this mean?

It means that one of the four sets of high current contacts in the F/R switch assembly are not making contact.

If your cart is wired the same as shown in attached schematic and the F/R is in F, it would be the contact set between the B and C studs on the F/R switch assembly.

[Coon Urine]

Ok, thanks. I'll check that out

[Coon Urine]

I may have it figured out. I was messing with the F&R switch back and forth while the pedal was pressed far enough for the solenoid click. I finally heard/saw a spark. I was able to repeat it again enough for the cart to move. The switch must be way to dirty/corroded to make good contact to send direction to motor. Looks like i have all the previously disconnected wires hooked up the way they are supposed to be. Big thanks to JohnnieB and others for the help. Now I will decide if I want to continue to strip down and rebuild or not.