|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-14-2017, 12:02 PM | #1 |
Not Yet Wild
Join Date: Mar 2009
Posts: 5
|
Rear end for EZGO Cart
We have a EZGO Golf Cart model TXTE48V ..date code H211...SN#2748926.......This cart has a bad (noisy and load) rear end. It operates great..just makes a lot of noise. this is a 48 Volt cart.
We also have a Junk EZGO Cart SN#997902 Mfg code A2997 (97 year) and its a 36Volt. Our question is will the rear end from the 36 Volt cart work in the 48Volt cart. Any Help will be appreciated. Thanks Wayne Waller |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-14-2017, 04:32 PM | #2 |
Getting Wild
Join Date: Feb 2016
Location: Bluffton, SC
Posts: 122
|
Re: Rear end for EZGO Cart
Have you checked or replaced the bearings in your 48v? They are a lot easier to pull and replace than swapping the entire rear end out
|
02-14-2017, 04:54 PM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Rear end for EZGO Cart
Will it fit, yes. But you may want to investigate the noise first.
|
02-15-2017, 12:49 PM | #4 |
Not Yet Wild
Join Date: Mar 2009
Posts: 5
|
Re: Rear end for EZGO Cart
Thanks....I will look into the noise.
|
02-15-2017, 01:04 PM | #5 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Rear end for EZGO Cart
That noise could be the motor
|
02-15-2017, 01:26 PM | #6 |
Not Yet Wild
Join Date: Mar 2009
Posts: 5
|
Re: Rear end for EZGO Cart
Getting someone to check it out....never thought about it being the motor.
Thanks |
|
|
Similar Threads | ||||
Thread | Forum | |||
'97 EZGO series cart rear end maint. | Electric EZGO | |||
03 EZgo series cart seems like rear end is slipping. | Electric EZGO | |||
EZGO Rear Transaxle off 4 cycle cart | Golf Carts and Parts | |||
how to lift rear of ezgo gas cart | Lifted Golf Carts |