|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-22-2017, 01:46 PM | #11 | |
Gone Wild
Join Date: Feb 2017
Location: Richmond, TX
Posts: 1,026
|
Re: I have a resistor on the controller ??? 92' marathon
Quote:
The B+ to A2 is essentially across the armature of the motor where spiking from the motor brushes could become a problem as brushes wear and more arcing is present. I think it would be ok to use one on each. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-22-2017, 01:56 PM | #12 |
Not Yet Wild
Join Date: Sep 2017
Location: Ocala Fl
Posts: 55
|
Re: I have a resistor on the controller ??? 92' marathon
Mov's are used in surge protectors. A lot of folks don't realize it but MOV's lose some of there protection after each surge. So for instance if you are in an area with a lot of electrical outages and have equipment plugged into them they eventually become power strips with no protection from a surge. Replace often.
|
10-22-2017, 02:23 PM | #13 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: I have a resistor on the controller ??? 92' marathon
Quote:
Of course, knowing me, I'd probably get two MOVs, install one in each place. |
|
11-10-2017, 11:14 AM | #14 |
Gone Wild
Join Date: Oct 2017
Location: San Diego Ca.
Posts: 289
|
Re: I have a resistor on the controller ??? 92' marathon
Got my MOV yesterday and re-read this thread before I installed it .
. Thanks again to everyone ... But just gotta give a special shout out to JohnnieB for all your posts here on the fourm. They have help me out a lot , you really take the time to explain the whole picture and that really helps us newbies out trying to figure all this out for the first time . . . As it Turns out the MOV came with a great diagram of exactly where to put it .......(sorry I cant help it). |
11-10-2017, 11:44 AM | #15 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: I have a resistor on the controller ??? 92' marathon
Suspect the former physics student ended up in the shipping department rather than engineering after getting caught with that "diagram" during an exam.
|
Tags |
controller |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Is this a speed controller or resistor on my 1991 Marathon | Electric EZGO | |||
Ezgo Marathon Resistor to Controller conversion kit | Design Center | |||
Resistor, Controller, Series, PDS, DCS, AC, Medalist, Marathon, TXT... | Electric EZGO | |||
resistor to controller | Electric EZGO | |||
Resistor to controller | Extreme DC! |