|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-15-2018, 01:01 PM | #1 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Replacing rear axle off a 36v Ez Go
Apparently the rear axle is strips and motor runs perfectly fine, but the tires don't move. I pulled the hub off both sides and they appear stripped. If the hubs are stripped, what about the inside of the axle??
How can I find that out? Can I take a 48v motor and use it on my 36v system? Reason I ask is I have a parts cart and it is 48v and the rear axle seems to be ok. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-15-2018, 01:34 PM | #2 | |
Gone Wild
Join Date: Jul 2017
Location: Baton Rouge
Posts: 350
|
Re: Replacing rear axle off a 36v Ez Go
Quote:
|
|
04-15-2018, 01:34 PM | #3 |
Gone Wild
Join Date: Mar 2013
Posts: 307
|
Re: Replacing rear axle off a 36v Ez Go
Will do. Thank you for responding!!
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Questions on replacing rear axle fluid on 2010 rxv | Electric EZGO | |||
Guidance on replacing driver side rear axle 2008 YDRE | Electric Yamaha | |||
2012 precedent- how to remove rear axle shaft/replace axle seal? | Electric Club Car | |||
Help on replacing rear axle bearing on 2009 RXVE | Electric EZGO | |||
replacing axle | Electric EZGO |